bims-enlima Biomed News
on Engineered living materials
Issue of 2026–11–01
twenty-two papers selected by
Rahul Kumar, Tallinna Tehnikaülikool



  1. Adv Sci (Weinh). 2026 Oct 25. pii: e78364. [Epub ahead of print]
      Nature rarely builds with uniform materials; instead, it achieves exceptional performance by arranging composition and structure across multiple length scales. Mimicking such architectures has become increasingly feasible with additive manufacturing, and especially with multimaterial 3D printing, where complex structures with spatially varying material composition can be fabricated. However, although 3D printing is widely recognized as a digital manufacturing method, multimaterial 3D printing remains only partially digitalized and still relies heavily on trial-and-error experimentation to identify printing strategies that produce the desired microstructures. To address this, we present the µSlicer that enables digital programming of internal multimaterial microstructures within individual printed strands. The µSlicer combines a numerical physics framework with an automatic signal generation module, allowing target microstructures to be translated into deposition signals for multimaterial extrusion. This approach fundamentally transforms slicing from purely geometric toolpath generation to microstructure programming, providing a route toward bioinspired, multifunctional, and digitally designed material architectures in extrusion-based additive manufacturing.
    Keywords:  3D printing; computational fluid dynamics; microstructure programming; raytracing
    DOI:  https://doi.org/10.1002/advs.78364
  2. Metab Eng. 2026 Oct 27. pii: S1096-7176(26)00170-9. [Epub ahead of print]99 102575
      Synthetic consortia of Escherichia coli and Saccharomyces cerevisiae offer a powerful division-of-labor strategy for chemical biosynthesis. However, maintaining the stability of cross-species populations remains a major challenge. Here, we report an interspecific autonomous population-control platform for dynamically regulating Escherichia coli and Saccharomyces cerevisiae consortia. We found that the growth rate disparity between these two microorganisms leads to the suppression of yeast growth ultimately resulting in population imbalance and low biosynthesis. To overcome it, an E. coli auto-induction lysis circuit and a S. cerevisiae-driven cross-species lysis circuit were developed using salicylate-mediated intercellular signaling pathway to dynamic control the growth of E. coli in the consortia. These systems successfully increased the final yeast proportion from 7% to 89% and 44.5%, respectively, effectively improving population stability of E. coli-S. cerevisiae consortia. As a proof-of-concept, we applied these lysis circuits to a division-of-labor system for caffeic acid biosynthesis and showed that they increased caffeic acid production, by 115% and 73%, respectively. This work establishes a versatile, auto-regulation platform for cross-species consortia control and will contribute to the bioproduction of different chemicals.
    Keywords:  Autonomous population-control; Co-culture; Cross-species microbial consortia; Division-of-labor; Dynamic lysis circuit
    DOI:  https://doi.org/10.1016/j.ymben.2026.102575
  3. ACS Appl Mater Interfaces. 2026 Nov 02.
      Hydrogel-based flexible sensors are promising for wearable electronics, while digital light processing (DLP) printing enables customized device fabrication. However, DLP manufacturing remains largely limited to monolithic structures because freshly printed hydrogels lack sufficient mechanical stability for constructing curved or enclosed architectures. Here, a modular manufacturing strategy is developed by enabling post-printing polymerization through a sustained radical-generation system comprising Cu2+, lignosulfonate (LS), and ammonium persulfate (APS). Unlike conventional photoinitiated systems that become inactive after light exposure, the Cu2+-LS complex maintains a dynamic Cu2+/Cu+ redox cycle in the dark, continuously activating APS to generate radicals. Consequently, independently printed hydrogel modules undergo interfacial polymerization and reconstruct a continuous covalent network, enabling assembled hydrogels to exhibit bulk-like load-bearing performance with failure occurring outside the assembled interface. The Cu-LS system also introduces mobile ions, imparting intrinsic ionic conductivity for strain sensing without conductive fillers. Using this approach, ring-integrated and kirigami-patterned wearable sensors are fabricated through modular assembly. A fingertip-mounted device achieves 99% accuracy in classifying ten sign-language gestures and enables real-time intelligent wheelchair control. This work converts hydrogel interfaces from inactive boundaries into active reconstruction sites, offering a versatile route to the modular fabrication of mechanically integrated soft electronics.
    Keywords:  assembly; dlp printing; human–machine interfaces; hydrogel; strain sensor
    DOI:  https://doi.org/10.1021/acsami.6c17652
  4. bioRxiv. 2026 Aug 31. pii: 2026.03.12.711416. [Epub ahead of print]
      Scientists have long classified organisms based on shared morphological characteristics. However, modern taxonomy, particularly for bacteria, is largely defined at the genetic level. Yet the information encoded in genetics propagates through many levels of biological organization: genes determine patterns of gene expression and protein production which, in turn, influence cellular physiology and behavior which, in turn, influence the collective morphology of growing populations. It is unclear how far up this hierarchy that the lower level taxonomic information remains preserved. Here, we show that bacterial genera can be identified from differences in the three-dimensional topographies of their growing populations. Using coherence-scanning white-light interferometry (WLI), which is capable of nanometer-resolution, we measure bacterial population topographies of 77 different clinical isolates representing four different genera. We then extract ten biophysically relevant features describing their surface structure. Using a simple machine-learning classifier, these topographic features identified bacterial genus with 97% accuracy, demonstrating that genus-level information remains present at the scale of population morphology. We hypothesize that these topographic "fingerprints" arise because differences in the underlying biophysics of bacterial growth propagate upward into measurable differences in population structure. To test this hypothesis, we performed biophysical simulations of bacterial population growth and applied our experimentally trained classifier directly to the resulting simulated topographies. By systematically modifying simulation parameters, we determined which changes were necessary to generate topographies classified as each of the experimentally observed genera. We find that a relatively small number of differences in cellular growth, cell-surface interactions, and initial conditions are sufficient to recreate the genus-associated differences observed experimentally, and we then show that using the topographic features from the simulations we can recover the underlying parameters used to simulate the topographies. Together, these results show that differences in lower-level bacterial behavior can propagate into distinct population-scale morphologies, and that taxonomic information can remain recoverable far above the molecular scale at which bacterial identity is conventionally defined.
    DOI:  https://doi.org/10.64898/2026.03.12.711416
  5. Methods Mol Biol. 2027 ;3101 223-241
      Chemo-optogenetic systems combining chemically induced dimerization with the spatiotemporal precision of light are powerful tools for probing and reconstructing complex cellular processes. The recent development of next-generation chemo-optogenetic systems using photoswitchable molecular glues has enabled reversible and repetitive optical control of protein dimerization. This chapter describes experimental workflows that use these next-generation chemo-optogenetic tools to reversibly control-in real time-protein localization, abundance, and function in defined subpopulations of cells (patterning). These methods can be applied to studies of signaling, trafficking, and regulated degradation.
    Keywords:  Chemo-optogenetics; Photoswitchable molecular glue; Protein degradation; Protein function; Protein localization
    DOI:  https://doi.org/10.1007/978-1-0716-5687-7_15
  6. Lab Chip. 2026 Oct 28.
      Saccharomyces cerevisiae is a powerful chassis for biosynthesis of plant-derived natural products, but optimizing multi-enzyme pathways remains bottlenecked by the lack of scalable screens for small molecules with weak to no fluorescence. Here we present a colony-level, fluorescence-activated cell sorting (FACS) workflow that converts weak metabolite fluorescence into a robust sorting signal via hydrogel compartmentalization. Single yeast cells are encapsulated into monodisperse, hollow PEG hydrogel microparticles ("PicoShells") that support clonal growth in suspension while permitting nutrient and gas exchange. Using the fluorescent properties of serpentine, a monoterpene indole alkaloid (MIA) natural product, we show while single-cell FACS cannot identify producers, PicoShell-encapsulated and grown yeast colonies generate a colony-amplified fluorescence signal suitable for standard FACS, reflecting total per-colony metabolite output. Time-resolved cytometry reveals delayed fluorescence accumulation consistent with production onset, and LC-MS (liquid chromatography-mass spectrometry) analysis of recovered cultures shows that stringent high-fluorescence gates enrich the producer phenotype from defined mixtures. In a spike-in experiment, we achieve up to ∼10-fold enrichment of producer strains by sorting the top 0.1-0.5% fluorescence fraction, highlighting the advantage of hydrogel encapsulation for metabolite-level screening. This approach enables scalable (>30 000 colonies per hour) enrichment of microbial producer phenotypes using a colony-based fluorescence signal without engineered reporter constructs and should generalize to other pathways where intrinsic or derivatized fluorescence can be measured at the colony level.
    DOI:  https://doi.org/10.1039/d6lc00434b
  7. JACS Au. 2026 Oct 26. 6(10): 5561-5570
      Biological systems can perform chemistry beyond their evolved reaction networks, but a reaction that is chemically possible does not necessarily occur in an intact system. I define the xenoreactome as the state- and reference-dependent network through which foreign chemistry enters a biological or cell-like system, is transformed and propagated, and is ultimately cleared or retained. The concept focuses on the factors that determine whether foreign chemistry is realized, including transport, localization, physiological state, downstream transfer, and clearance. Xenoreactomes may remain entirely molecular, carry non-native chemical or elemental features through existing biological machinery, or support reaction sequences with no direct biological counterpart, such as sustained free-radical vinyl polymerization. In some cases, xenochemical products can also accumulate sufficiently to form polymers, condensed phases, or other material states. For these systems, I introduce a simple quantitative criterion that relates xenochemical production and persistence to the threshold required for material formation. The xenoreactome provides a framework for asking which foreign chemistry biological systems can actually support, how far it propagates, and what ultimately happens to its products.
    Keywords:  artificial cells; biocatalysis; biohybrid materials; cellular polymerization; metabolic engineering; new-to-nature chemistry; synthetic biology; xenoreactome
    DOI:  https://doi.org/10.1021/jacsau.6c01406
  8. bioRxiv. 2026 Aug 31. pii: 2026.08.28.747722. [Epub ahead of print]
      SynNotch-CAR circuits improve T cell specificity by coupling antigen recognition to inducible CAR expression. However, basal CAR expression without receptor activation, termed here as leakiness, can reduce the separation between killing of intended target cells and sparing of antigen-positive off-target cells, limiting target-cell discrimination. Here, we systematically quantified basal CAR expression for several synNotch-CAR designs and developed a coupled ordinary differential equation model to show that discrimination depends on basal output, CAR potency, and effector-to-target ratio. We introduced C-terminal tags such as fluorescent proteins, degron domains, endocytosis signals, and endoplasmic reticulum retention motifs as a strategy to reduce CAR leakiness. We found that fluorescent proteins and degron-containing tags reduced basal CAR surface expression while preserving antigen-induced CAR expression, improving discrimination of antigen-density sensing and combinatorial circuits in vitro. In xenograft models, fluorescent protein-tagged CARs improved discrimination by reducing activity against off-target cells while retaining activity against high-antigen tumors. Degron-containing constructs reduced basal CAR expression in vitro but showed suboptimal performance in vivo, revealing a trade-off between basal CAR suppression and induced CAR persistence. Together, these findings demonstrate that basal output expression is a key parameter for inducible genetic circuit designs and establish layered transcriptional and post-translational regulation as a strategy to improve the fidelity of inducible T cell circuits.
    DOI:  https://doi.org/10.64898/2026.08.28.747722
  9. Adv Mater. 2026 Oct 26. pii: e75118. [Epub ahead of print]
      Conventional static biomaterials and synthetic nanomedicines struggle to penetrate recalcitrant biofilms and orchestrate tissue regeneration in deep-seated infections due to limited autonomous navigation and a lack of spatiotemporal responsiveness. Here, we conceptualize and develop a programmable engineered living vehicle (ELV) that functions as an autonomous biofactory for the synergistic management of drug-resistant osteomyelitis. Built upon a self-propelled Escherichia coli Nissle 1917 chassis with innate ecological dominance, these living biofactories are hierarchically equipped with environmental biosensors and logic-gated computing modules. Crucially, leveraging AlphaFold 3-guided molecular docking, we engineered multiscale thermo-responsive genetic logic circuits that enable precise, temperature-dependent biomanufacturing of bacteriolytic lysostaphin (LYS) and vasoactive intestinal peptide (VIP) (≥37°C), coupled with a fail-safe thermal self-destruct mechanism (≥42°C). Furthermore, surface-engineered (DSS)6 peptides confer robust hydroxyapatite affinity, acting as a bone-homing navigation module. In a rat osteomyelitis model induced by methicillin-resistant Staphylococcus aureus (MRSA), intravenously deployed ELV biofactories autonomously navigate to the infected niche, actively penetrate biofilms, and outperform vancomycin in pathogen clearance. Concurrently, localized payload secretion reprograms the osteo-immune microenvironment, significantly accelerating bone repair. This work establishes a versatile paradigm for next-generation smart living therapeutics, bridging synthetic biology with micro-engineering to address complex clinical challenges.
    Keywords:  bone regeneration; engineered living vehicles; osteo‐immunomodulation; synthetic biology
    DOI:  https://doi.org/10.1002/adma.75118
  10. Small. 2026 Oct 29. pii: e76438. [Epub ahead of print]
      Pickering emulsions are stabilized by coating droplet surfaces with solid particles that provide exceptional stability and suppress coalescence. However, these particles are typically inert and lock emulsions into fixed morphologies, limiting their functionality. Creating smart emulsions, which can change their morphology in response to triggers, remains a major challenge. This research introduces an oil-in-water Pickering emulsion stabilized by Bacillus subtilis endospores that combines long-term stability with germination-triggered responsiveness. Upon nutrient exposure, dormant endospores germinate and expand, generating compressive stress on the droplet's surface. In response to this, droplets develop interfacial wrinkles, which correlate with the initial spore surface coverage, with higher coverage producing more pronounced, finer wrinkles. Notably, not only does our emulsion retain stability at room temperature for months, but the endospores remain viable and can be germinated on demand. This work provides a simple route to producing robust, sustainable, and "bio‑actuated" emulsions that undergo controlled interfacial morphological changes.
    Keywords:  bacterial spores; pickering emulsions; responsive materials; wrinkled droplets
    DOI:  https://doi.org/10.1002/smll.76438
  11. bioRxiv. 2026 Oct 10. pii: 2026.10.03.755986. [Epub ahead of print]
      Gram-positive bacteria use secreted peptides and peptide-responsive transcription factors for quorum sensing. Here, we demonstrate that intracellular expression of these peptide effectors with their cognate transcription factors leads to regulation of gene expression in both in vitro and in vivo systems. Because both effector and regulatory parts can be readily expressed, complex circuits, including auto-activation schemes, can be developed, with switch-like behaviors. Moreover, the peptide effectors can be fused to proteins, enabling a direct intracellular readout of translation and potentially allowing any protein to encode regulatory interactions in cells. Our results support a foundation for regulatory circuits that extend beyond canonical components such as LacI and TetR.
    DOI:  https://doi.org/10.64898/2026.10.03.755986
  12. Front Syst Biol. 2026 ;6 1905585
      Engineered Living Materials (ELMs) combine living cells with matrices, interfaces, environmental fields, and sometimes electronic or computational controllers. Their multicomponent architecture creates an attribution problem: the same observed output may reflect passive material physics, active cellular regulation, interface or morphological change, environmental gradients, controller adaptation, or coupled-system dynamics. This article proposes ELM-CLAIM (Engineered Living Materials-Controls for Learning, Adaptation, Intelligence, and Memory), an author-proposed claim-calibration and reporting framework for matching adaptive vocabulary to measurable state variables, temporal criteria, attribution targets, and evidence classes. The framework classifies specific behaviors from passive responsiveness (L0) through active responsiveness (L1), adaptation (L2), memory-like behavior (L3), learning-like behavior (L4), and autonomous goal-directedness (L5). It also provides an evidence-tiered claim-to-control matrix, proportional substitution rules for experimentally intractable controls, component- and controller-level attribution logic, model-transparency requirements, and a reviewer-oriented reporting checklist. Essential entries denote evidential functions rather than a single mandatory assay, allowing justified orthogonal controls while requiring claims to be lowered when major alternatives remain unresolved. Published cases are used illustratively to stress-test interpretability rather than to validate the framework statistically. ELM-CLAIM calibrates language; it does not by itself validate an experiment, define cognition, or constitute a community standard. Community testing, inter-reviewer reliability assessment, and prospective experimental use remain necessary next steps.
    Keywords:  adaptive materials; attribution; biohybrid systems; claim calibration; engineered living materials; experimental controls; learning-like behavior; memory-like behavior
    DOI:  https://doi.org/10.3389/fsysb.2026.1905585
  13. Colloids Surf B Biointerfaces. 2026 Oct 23. pii: S0927-7765(26)00868-4. [Epub ahead of print]270 116280
      Controlling biointerfacial interactions is a fundamental challenge in three-dimensional (3D) cell culture, where the balance between cell-substrate adhesion and cell-cell cohesion dictates the formation of multicellular constructs. Here, we rationally engineered a superhydrophobic, protein-repellent aluminum mesh via hierarchical structuring and heptadecafluoro-1,1,2,2-tetrahydrodecyl trichlorosilane (HDFS) functionalization to direct topography-guided neural stem cell (NSC) assembly. Physicochemical characterization demonstrated a highly stable non-wetting interface with a static water contact angle of 151.5 ° ± 1.4 °, retaining its superhydrophobic state even after rigorous ethanol sterilization. Crucially, the functionalized interface significantly suppressed protein adsorption, thereby establishing a low-fouling environment that minimizes integrin-mediated non-specific cell adhesion. Time-resolved microparticle tracking elucidated that the synergistic interplay between the low-surface-energy plastron layer and the open mesh microtopography channels physical redistribution away from exposed solid phases toward mesh-defined liquid domains. When applied as an in vitro biointerface, these interfacial physical cues orchestrated the spontaneous aggregation of mouse NSCs into compact, spatially confined 3D spheroids with high viability and preserved stemness. Transcriptomic profiling further confirmed that the topography-guided 3D assembly on our biointerface induced robust microenvironmental adaptations, evidenced by downregulated ribosome biogenesis and upregulated hypoxia/glycolysis and neural-function-associated pathways. This study demonstrates that engineering the physical and chemical wettability parameters of metallic mesh biointerfaces provides a robust, scalable strategy for precisely regulating multicellular 3D architecture and directing cellular fate.
    Keywords:  3D cell culture; Aluminum mesh; Neural stem cell spheroids; Protein repellency; Superhydrophobic biointerface
    DOI:  https://doi.org/10.1016/j.colsurfb.2026.116280
  14. Development. 2026 Oct 15. pii: dev204876. [Epub ahead of print]153(20):
      During multicellular morphogenesis, tissues display mechanical behaviors reminiscent of non-living materials. Unlike inert matter, however, tissues are not shaped solely by external forces; they self-assemble by generating - and adapting to - internal forces, a process that requires active catabolic (energetic) and anabolic (biosynthetic) metabolism. Crucially, tissue mechanics can in turn instruct metabolic states, revealing a reciprocal relationship. In this Review, we first examine the central role of metabolism in controlling the mechanics of diverse morphogenetic processes. Moving beyond the simplistic view of metabolism as a ubiquitous supplier of energy and biosynthetic precursors upstream of mechanics, we highlight instead its tight spatiotemporal regulation and specificity in shaping particular aspects of tissue mechanics. We also discuss evidence for mechanical regulation of metabolism and propose in vivo systems in which similar mechanisms may operate. By focusing on the very properties that distinguish living materials from inert ones, research into mechano-metabolic feedback loops during multicellular morphogenesis has the potential to drive major advances in our understanding of developmental biology.
    Keywords:  Mechanics; Metabolism; Morphogenesis
    DOI:  https://doi.org/10.1242/dev.204876
  15. ACS Nano. 2026 Oct 26.
      Weak polyelectrolyte hydrogels are emerging as a versatile platform for ion transport and separation, desalination, and energy applications. However, a predictive understanding of how dynamic charge regulation at the nanoscopic scale influences ionic mobility in these polymer networks remains elusive. Here, using large-scale molecular simulations, we dissect the coupled mechanisms governing small-ion transport in weak polyelectrolyte hydrogels, and reveal how charge density, competitive binding, and dynamic charge regulation jointly control ion mobility. By systematically isolating these effects, we uncover a pronounced nonmonotonic dependence of ion self-diffusion on hydrogel pKa and salt concentration for multivalent ions. Strikingly, allowing the hydrogel backbone to dynamically regulate its charge eliminates this nonmonotonicity and leads to dramatic enhancements in ion mobility, with diffusion coefficients increasing by more than a factor of 2 for trivalent ions. We attribute this effect to a protonation-assisted hopping mechanism that continuously remodels the local electrostatic landscape, providing an additional molecular-scale pathway for ion unbinding beyond translational escape and accelerating ion-pair kinetics without affecting the fraction of free ions. Our results demonstrate that dynamic nanoscale charge regulation can decouple ion mobility from equilibrium binding strength, offering a powerful design lever unavailable in fixed-charge materials. Building upon these insights, we propose simple molecular design principles for next-generation ion-conducting hydrogels and suggest alternative strategies for nanostructured membranes, energy materials, and biologically inspired charge-adaptive soft matter.
    Keywords:  Monte Carlo; acid−base reactions; charge regulation; hydrogels; ion transport; molecular dynamics
    DOI:  https://doi.org/10.1021/acsnano.6c12908
  16. bioRxiv. 2026 Oct 13. pii: 2026.09.01.748612. [Epub ahead of print]
      Many microbes use vitamins they cannot synthesize. As a result, vitamin availability impacts microbial community composition and productivity. Yet how vitamins become available to users remains poorly understood. To understand the basis of vitamin sharing, we quantified vitamin B12 synthesis and uptake in over 200 soil, freshwater, and marine bacterial isolates. We reveal the existence of four strategies demarcated by all combinations of high or limited B12 synthesis and uptake. B12 synthesis, but not uptake, was predictable from genomes without pathway knowledge. Among synthesizers, the fraction of vitamin that was extracellular varied over 100-fold. Extracellular B12 was quantitatively predicted from a dynamic model capturing only release via death and reuptake by living cells. A subset of synthesizers rapidly reclaim released B12, resulting in limited sharing, while retainers exhibit limited release or uptake, and providers release without reuptake. Thus, extracellular B12 availability is governed not by synthesis alone, but by the balance between release and uptake.
    DOI:  https://doi.org/10.64898/2026.09.01.748612
  17. Nat Commun. 2026 09 25. pii: 11130. [Epub ahead of print]17(1):
      Active systems across scales, ranging from molecular machines to human crowds, are usually modeled as assemblies of self-propelled particles driven by internally generated forces. However, these models often assume memoryless dynamics. Here, guided by the example of living cells, which have recently been shown to display multi-timescale memory effects, we introduce a minimal theoretical framework that incorporates internal state dynamics and environmental sensing into overdamped active particle models of cell migration. We show that when the self-propulsion depends on internal variables with their own complex dynamics-modulated by local environmental cues- environmental memory spontaneously emerges and gives rise to new classes of behaviours. These include memory-induced responses, adaptable localization in complex landscapes, suppression of motility-induced phase separation, and enhanced jamming transitions. Our results demonstrate how minimal information processing capabilities, intrinsic to nonequilibrium agents with internal states like living cells, can profoundly influence both individual and collective behaviours. This framework bridges cell-scale activity and large-scale intelligent motion in cell assemblies, and opens the way to the quantitative analysis and design of systems ranging from synthetic colloids to biological collectives and robotic swarms.
    DOI:  https://doi.org/10.1038/s41467-026-77681-z
  18. N Biotechnol. 2026 Oct 27. pii: S1871-6784(26)00125-1. [Epub ahead of print]
      Violacein (VIO) is a bacterial secondary metabolite with potential applications in healthcare, textile, and cosmetic industries. Although modular synthetic E. coli co-cultures are promising for biomanufacturing, VIO production in such systems depends on efficient cross-feeding, which requires spatial proximity and stable interactions among co-culture members. Here, we demonstrate that a spatially partitioned bioreactor can support coexisting suspended and carrier-associated states of a mutualistic recombinant E. coli co-culture, enabling direct comparison of their crude VIO production performance. The co-culture was cultivated in a spatially partitioned bioreactor consisting of an aerobic stirred-tank compartment connected to an oxygen-limited cartridge containing Fibra-Cel® discs as carriers, thereby enabling biomass partitioning into suspended and adherent fractions. Across three biological replicates, the adherent biofilm-associated fraction consistently exhibited higher biomass-normalized crude VIO production than the corresponding suspended fraction, with 4.51-, 20.05-, and 5.51-fold increases. Although the adherent fraction represented only 10.6-24.0% of the total biomass, it contributed 35.4-86.3% of the total crude VIO. These results show that carrier-associated spatial organization within the partitioned bioreactor supported the formation of highly productive biofilm-associated E. coli co-culture populations. The presented concept highlights the potential of spatially organized, carrier-associated co-cultures for the intensification of secondary metabolite production and future biofilm-based bioprocessing applications.
    Keywords:  Biofilm; Oxygen-limited zone; Synthetic mutualistic E. coli co-culture; Violacein; spatially partitioned bioreactor system
    DOI:  https://doi.org/10.1016/j.nbt.2026.10.013
  19. Acta Biomater. 2026 Oct 30. pii: S1742-7061(26)00741-5. [Epub ahead of print]
      Cell migration in three-dimensional (3D) environments is highly plastic and regulated by extracellular matrix (ECM) cues. Engineered biomaterials provide controllable platforms to investigate how specific matrix signals regulate cell behavior in 3D, yet how defined biochemical signals control migration modes remains unclear. Here, we present tunable fibrous polyisocyanide (PIC) hydrogels functionalized with integrin-binding RGD peptides, cadherin-mimetic HAVDI peptides, or no ligands to direct mesenchymal, hybrid, or amoeboid-like migration of human adipose-derived stem cells without altering matrix mechanics. Using live-cell tracking, 3D displacement microscopy, matrix remodeling analysis, and YAP nuclear localization, we show that ligand identity governs adhesion organization, force transmission, and mechanotransduction. RGD-functionalized matrices are associated with punctate β1-integrin staining at the cell membrane, extensive matrix remodeling, strong YAP activation and upregulation of migration-related genes. In contrast, non-adhesive matrices limit adhesion formation, resulting in weak force transmission and amoeboid-like state. HAVDI-functionalized matrices are associated with punctate membrane-associated N-cadherin staining and heterogeneous cellular responses, supporting a hybrid migration mode associated with adhesion organization and force transmission. Together, these findings demonstrate that ligand identity alone is able to program migration mode in a force-responsive 3D matrix and provide a versatile platform to dissect cell-matrix interactions in complex environments. STATEMENT OF SIGNIFICANCE: Cell migration in tissues is highly adaptable, yet precise control of migration modes in defined 3D biomaterials remains challenging. We introduce fibrous PIC hydrogels presenting RGD, HAVDI, or no adhesive ligands to bias human stem cells toward mesenchymal-like, hybrid, or amoeboid-like migration states. By linking ligand identity to adhesion organization, matrix remodeling, YAP mechanotransduction, and gene expression, this work provides a minimal platform to dissect and engineer 3D cell-matrix interactions.
    Keywords:  Cell migration; Cell-matrix interactions; Fibrous matrix; Matrix remodeling; Mechanotransduction
    DOI:  https://doi.org/10.1016/j.actbio.2026.10.063
  20. Gels. 2026 Oct 02. pii: 892. [Epub ahead of print]12(10):
      Conductive hydrogels are widely pursued for neural tissue engineering, but the conventional route of polymerizing conductive monomers in situ requires toxic monomers or organic solvents and is incompatible with cell encapsulation. Here, conductive hydrogels were prepared in a single step by dispersing pre-polymerized polyaniline (PANI) particles or poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) nanoparticles into a gelatin methacryloyl (GelMA) precursor and photocrosslinking, giving a simpler, cell-friendly route from an injectable precursor; the two polymers were compared directly within a single platform. PEDOT:PSS was uniformly integrated, whereas PANI progressively aggregated, and these differences in dispersibility were reflected in the microstructure, mechanical properties, and swelling behavior of the hydrogels. Both polymers increased the electrical conductance of the hydrogels; the increase was statistically significant for PANI but small in magnitude, and the cellular outcomes diverged in the opposite direction. Over 7 days, the PEDOT:PSS 0.2% group supported SH-SY5Y metabolic activity comparable to GelMA, whereas PANI reduced it. After neuronal induction, neurite outgrowth appeared most extensive in the PEDOT:PSS 0.2% hydrogels, with co-detection of βIII-tubulin, MAP2, and synaptophysin. Cells could also be encapsulated within the precursor and photocrosslinked in situ, remaining viable in all groups, demonstrating that the one-step route is compatible with three-dimensional cell-laden constructs. Because the conductance differences were small and ran opposite to the biological outcome, these findings indicate that the performance of GelMA-based conductive hydrogels is associated with polymer dispersibility, surface chemistry, and mechanical properties rather than with bulk conductance, and point to dispersion stability rather than intrinsic conductivity as the primary design variable at cell-compatible loadings, with GelMA/PEDOT:PSS as a candidate platform for neural tissue engineering.
    Keywords:  PEDOT:PSS; conductive hydrogel; neural tissue engineering; neurite outgrowth; photocrosslinking
    DOI:  https://doi.org/10.3390/gels12100892
  21. Methods Mol Biol. 2027 ;3089 143-156
      Biofabrication enables the controlled generation of three-dimensional cell cultures that can be highly useful to study different cellular phenotypes. As melanoma cells reveal high plasticity, and the "phenotype switching model" defining the cells as either proliferative or migratory active has been described, we recently developed a 3D bioprinted model mimicking these phenotypes. Here, we describe the generation of these bioprinted models based on either Matrigel or Cellink Bioink, which can be used with various cell lines and which allows for the analysis of cell response on microscopic and molecular levels. This model system offers novel opportunities for fundamental research and drug testing on heterogeneous tumors like melanoma.
    Keywords:  3D cell culture; Bioprinting; Heterogeneity; Hydrogel; Plasticity
    DOI:  https://doi.org/10.1007/978-1-0716-5619-8_10