bims-enlima Biomed News
on Engineered living materials
Issue of 2026–10–25
25 papers selected by
Rahul Kumar, Tallinna Tehnikaülikool



  1. ACS Biomater Sci Eng. 2026 Oct 20.
      Engineered living materials seek to capture the sensitivity, responsiveness, and programmable characteristics of biological systems. One emergent property of living systems is genetically driven spatial patterning, which controls cell differentiation and the development of complex multicellular organisms. Inspired by this capability, we use bacteria to spatially control material assembly. In our system, extracellular electron transfer (EET) flux from Shewanella oneidensis drives hydrogel synthesis via copper-catalyzed radical polymerization. We first construct a recombinant quorum-sensing system in S. oneidensis that allows for cell-cell communication between "sender" and "receiver" cells through an autoinducer. We then examine controlled gene expression and EET-driven chemical transformation in various synthetic consortia. Via diffusion through agarose, we examine 2D patterns of gene expression relative to localized sender cell populations and demonstrate controlled hydrogel crosslinking in predictable patterns. Finally, we apply computational methods and NOT logic in "receiver" cells toward more complex patterns of gene expression. Our results highlight the potential of bacteria to program material systems with life-like properties, including self-assembly, environmental responsiveness, and patterned differentiation.
    Keywords:  extracellular electron transfer; hydrogels; living materials; quorum sensing; spatiotemporal patterning; synthetic biology
    DOI:  https://doi.org/10.1021/acsbiomaterials.6c01127
  2. ACS Appl Bio Mater. 2026 Oct 19.
      Additive manufacturing of engineered living materials (ELMs) enables the spatial patterning of living cells or organisms within three-dimensional (3D) polymer matrices. However, effective biocontainment, defined as the ability to retain cells within 3D-printed matrices during the application period, remains a key limitation for ELMs requiring physical confinement. While synthetic biology provides cell-specific biocontainment strategies, materials-based approaches can enable generic cell retention capabilities. Therefore, we applied a materials-based strategy that combines pre-printing formulation development and post-printing processing to increase the retention of yeast Saccharomyces cerevisiae in Pluronic F127-bisurethane methacrylate (F127-BUM) hydrogels. F127-BUM precursor solutions were formulated with the comonomers methacrylic acid (MAA) and/or 2-(dimethylamino)ethyl methacrylate (DMAEMA), extrusion-printed, UV-cross-linked, and immersed in 70 vol % ethanol for 60 or 300 s before cultivation. Comonomer addition preserved dimensional fidelity, thermoresponsiveness, and shear-thinning behavior for 3D printing. After immobilization and cross-linking, DMAEMA and higher concentrations of MAA considerably reduced yeast viability, whereas a 70-80% viability was observed for 0.03 and 0.06 mol L-1 MAA. With 0.06 mol L-1 MAA and 300 s ethanol immersion, the yeast retention time reached 98 ± 12 h, which was approximately 48% longer than that of the correspondingly treated F127-BUM-only control and represented about a 465% increase relative to the untreated F127-BUM-only control. After ethanol immersion, a peripheral growth-free zone developed around a metabolically active core, enhancing cell retention and contributing to delayed cell escape. The selected MAA-containing ELMs remained metabolically active and showed nearly 38% higher apparent glucose-to-ethanol conversion than treated F127-BUM-only controls. The suspension cultures fermented faster and achieved higher yield. Our method achieved enhanced biocontainment, with an operational window of about 4-5 days. In conclusion, we demonstrate that combining pre-printing and post-printing processes can enhance biocontainment for different ELM applications. We suggest the integration of this method with synthetic-biology strategies to further extend biocontainment duration for metabolically active living materials.
    Keywords:  3D-printed bioreactors, metabolically active living materials; Pluronic F127; additive manufacturing; biocontainment; bioproduction; cell retention; engineered living materials; fermentation; hydrogels
    DOI:  https://doi.org/10.1021/acsabm.6c01394
  3. Nat Biotechnol. 2026 Oct 20.
      Microorganisms have the potential to deliver growth-promoting benefits to plants and crops; however, to be useful in a field setting, their gene expression should be programmable and restricted to specific plant hosts and conditions. Here, using O-methyl-L-tyrosine (OMY) as a model compound, we establish noncanonical amino acids (ncAAs) as a tool for plant-based control of associated microbial activity. We use genetic code expansion to engineer OMY-dependent control of protein synthesis in the soil bacterium Bacillus subtilis. Engineered B. subtilis strains express an orthogonal aminoacyl-tRNA synthetase and tRNA pair that, upon provision of OMY, results in suppression of in-frame amber stop codons in target transcripts. We engineer Arabidopsis, tomato and poplar to biosynthesize OMY, showing that plant-derived OMY can stimulate gene expression in both model and wild soil bacteria. This demonstrates that inducible and tissue-specific expression of a single biosynthetic enzyme by the plant enables on-demand control over microbial activity, establishing ncAAs as a tool for programming plant-microorganism partnerships.
    DOI:  https://doi.org/10.1038/s41587-026-03360-5
  4. Nat Commun. 2026 Oct 22. pii: 10827. [Epub ahead of print]17(1):
      Highly compliant deformable soft actuators enable the engineering of adaptive life-like systems. Biohybrid living materials expand possibilities for autonomous, self-powered, environmentally responsive systems with easy biological integration. Here, we present a light-driven living soft actuator that integrates the photosynthetic microalga Chlamydomonas reinhardtii with a pH-responsive poly(3-(acrylamido)phenylboronic acid-acrylamide)/polyacrylamide bilayer hydrogel. When exposed to light, through photosynthesis and N-assimilation, the microalgae locally ionize the polymer network, causing the bilayer actuator to bend. In darkness, through respiration, the microalgae locally release CO2 that protonates the polymer chains, reversing the deformation. This algae actuator enables finely controlled and reversible motions, with a large bending amplitude achieved within 18 hours and an initial response time of 10-20 s, which is maintained over 10 cycles of continuous operation. We demonstrate light-controlled grippers, highlighting the potential of algae-powered actuation for sustainable and autonomous soft devices.
    DOI:  https://doi.org/10.1038/s41467-026-78653-z
  5. Sci Adv. 2026 Oct 23. 12(43): eaec7416
      Omnipresent in biology, fibrous networks like collagen possess unique properties: dynamic network via crosslinking and degradation. This intrinsic adaptivity plays a critical role in regulating cell behavior via cell-matrix interactions. Built from biological building blocks, however, these networks are challenging to manipulate or even control. Here, we introduce dynamic network regulation via photochemical control in a synthetic and fibrous highly biomimetic hydrogel. As a proof-of-concept, we demonstrate that the dynamic control over the mechanical properties of this adaptive in vitro model can be used to modulate cell spreading and mechanotransduction in three-dimensional (3D) mesenchymal stromal cell cultures. Our approach not only opens the door to on-demand mechanically adaptive gels with unprecedented control, but simultaneously offers easy processibility and cell extraction of the used synthetic gel.
    DOI:  https://doi.org/10.1126/sciadv.aec7416
  6. Small. 2026 Oct 18. e76284
      Achieving tunable strain-stiffening in tough hydrogels via muscle-mimicking training remains a key challenge for nonlinear biomimetic mechanics. Microgel-reinforced composite hydrogels (MR-gels), combine rigid polyelectrolyte microspheres with a soft polyacrylamide matrix, offering an ideal platform for programming strain-stiffening behavior via hierarchical microsphere fracture. Here, we report that physical training controlling stretching amplitude and number of repetitions enables stable and tunable strain-stiffening in MR-gels. Unlike conventional expectations, a single stretch is insufficient, training equilibrium requires approximately 300 cycles. The resulting MR-gel exhibit stable and broadly tunable soft-to-stiff transition (0.4-3.1), strain-stiffening capacity (3.1-17.8), and modulus of the soft (240 to 40 kPa) and stiff (814 to 713 kPa) regimes, matching the nonlinear mechanics of diverse biological mechanicals. Mechanistically, the training mode achieves tunable strain-stiffening by controlling the degree of microgel fracture and entangled polymer chain sliding. At equilibrium, fragmented microgels form an interconnected string-like network via topological entanglements and covalent crosslinks, raising the fatigue threshold from 689.6 to 1269.8 J/m2. Furthermore, the trained MR-gel enables full envelopment of a high-speed falling iron ball for effective deceleration and superior impact cushioning. This work establishes a versatile strategy for programming mechanical behavior in soft materials, with broad implications for soft robotics, wearable electronics, and biomedicine.
    Keywords:  double‐network; hydrogel; mechanical training; strain‐stiffening
    DOI:  https://doi.org/10.1002/smll.76284
  7. ACS Synth Biol. 2026 Oct 16. 15(10): 4157-4171
      Genetic code expansion with noncanonical amino acids (ncAAs) opens new opportunities for the design and engineering of proteins by broadening their chemical repertoire. Unfortunately, ncAA incorporation into proteins is limited both by a small collection of orthogonal aminoacyl-tRNA synthetases (aaRSs) and tRNAs and by low-throughput methods to discover them. Here, we report the discovery, characterization, and engineering of a UGA suppressing orthogonal translation system mined from metagenomic data. We develop an integrated computational and experimental pipeline based on cell-free gene expression to screen the orthogonality of >200 tRNAs, test >1,250 combinations of aaRS/tRNA pairs, and identify the AP1 TrpRS/tRNATrpUCA as an orthogonal pair that natively encodes tryptophan at the UGA codon. We demonstrate that the AP1 TrpRS/tRNATrpUCA is highly active in cell-free and cellular contexts. We then use Ochre, a genomically recoded Escherichia coli strain that lacks UAG and UGA codons, to engineer an AP1 TrpRS variant capable of 5-hydroxytryptophan incorporation at an open UGA codon. We anticipate that our strategy of integrating metagenomic bioprospecting with cell-free screening and cell-based engineering will accelerate the discovery and optimization of orthogonal translation systems for genetic code expansion.
    Keywords:  bioprospecting; cell-free gene expression; genetic code expansion; noncanonical amino acids; orthogonal translation systems; protein engineering, genomically recoded organisms
    DOI:  https://doi.org/10.1021/acssynbio.6c00373
  8. Proc Natl Acad Sci U S A. 2026 Oct 27. 123(43): e2624792123
      Cyanobacteria provide a promising platform for light-driven heterologous protein production. In heterologous production systems, cells are typically lysed for product purification or to facilitate interaction with external substrates, unless the product is secreted. Fusion to molecular "shipping labels" known as signal peptides can target chimeric proteins to native membrane translocation pathways and result in secretion. In this work, we identified signal peptides from the model cyanobacterium Synechococcus elongatus PCC 7942 (S. elongatus) and genetically fused to two heterologous enzymes: the reporter nanoluciferase (NLuc) and an oxidative laccase (CotA). Increased extracellular activity was observed for one or more signal-protein variants for both enzymes. Furthermore, cells of S. elongatus producing a signal-laccase chimera were encapsulated within an alginate hydrogel, and the resulting engineered living material released sufficient enzyme to decolorize a dye pollutant in its surroundings. These findings streamline recombinant protein production in cyanobacteria and facilitate environmental interactions with cell products, expanding the potential applications of both free-living and material-encapsulated cyanobacteria.
    Keywords:  bioremediation; cyanobacteria; engineered living materials; protein secretion; signal peptides
    DOI:  https://doi.org/10.1073/pnas.2624792123
  9. ACS Nano. 2026 Oct 20. 20(41): 27949-27959
      Spatial organization underpins efficient multistep catalysis in nature, yet recreating such organization on living cell surfaces using mild, enzyme-compatible and catalytically functional materials remains challenging. Here we report an l-cysteine-triggered silk fibroin/lysozyme ultrathin film (SLF) that assembles directly on living microbial cells as a catalytic surface layer. SLF forms continuous nanoscale coatings on Saccharomyces cerevisiae, Gluconobacter oxydans and Escherichia coli Nissle 1917. Spectroscopic and structural analyses show that film formation proceeds through electrostatic complexation, restricted conformational rearrangement, increased hydrophobic exposure, β-sheet-rich ordering and network formation, rather than simple deposition. The coating maintains cell viability, enhances stress tolerance and provides size-selective permeability for small-molecule transport. SLF also incorporates exogenous enzymes efficiently during assembly. As a proof of concept, ω-transaminase-integrated SLF on G. oxydans couples host glycerol oxidation with surface transamination, enabling one-pot conversion of glycerol to serinol with a titer of 2.7 g L-1 within 12 h, up to 37-fold higher than a stepwise process. This work establishes ultrathin protein films as living catalytic interfaces for single-cell biocatalyst design and cascade biomanufacturing.
    Keywords:  cascade biotransformation; living catalytic interface; protein assembly; single-cell coating; ultrathin protein film; whole-cell biocatalysis
    DOI:  https://doi.org/10.1021/acsnano.6c12754
  10. Nat Biotechnol. 2026 Oct 21.
      Transcriptomic measurement technologies provide powerful approaches to understand biology but are limited to providing either a high-resolution snapshot at a moment in time or a low-resolution history of transcription constrained to a few genes over a narrow time range. Here, we introduce the 'recordanelle', a single-component synthetic organelle capable of recording the transcriptome in human cells. Recordanelles are composed of a mitochondrial membrane anchor, a condensate assembler and a poly(A)-binding protein. We demonstrate that the recordanelle can be engineered to recruit engineered RNAs or a sampling of up to 90% of all endogenous mRNAs and protect them over several days. We further show that transient and dynamic transcriptional responses resulting from inducible promoters or interferon signaling are preserved throughout time within the recordanelle at the single-cell level. This work provides a nondisruptive and unbiased transcriptome-wide single-cell RNA recording technology to enable a deeper understanding of biology.
    DOI:  https://doi.org/10.1038/s41587-026-03327-6
  11. Small Methods. 2026 Oct 21. e71106
      Mechanical characterization of 3D printed hydrogel microstructures typically relies on invasive, contact-based methods that are challenging to perform in aqueous environments. Here, we present a fluorescence lifetime imaging microscopy (FLIM)-based approach that exploits the intrinsic autofluorescence of two-photon 3D laser-printed hydrogel microstructures to enable label- and contact-free mechanical mapping. Poly(ethylene glycol) (PEG)-based micropillar arrays are fabricated with systematically varied laser doses to modulate the degree of network crosslinking, thereby tuning the material stiffness. FLIM measurements reveal a monotonic increase in the intensity-averaged autofluorescence lifetime with increasing laser dose, reflecting a concomitant increase in stiffness. To quantify the mechanical properties of the 3D printed microstructures in aqueous media, we develop a buoyancy-corrected nanoindentation protocol. The resulting reduced moduli exhibit the same trend and show strong agreement with the fluorescence lifetime measurements. In addition, the autofluorescence signal of the micropillars proved highly sensitive to changes in the hydration state. Thus, these results demonstrate that FLIM is a powerful, noninvasive tool for high-resolution mechanical mapping of soft materials, particularly in conditions where other more conventional methodologies are challenging.
    Keywords:  fluorescence lifetime imaging microscopy; mechanical characterization; nanoindentation; photopolymerization; two‐photon laser printing
    DOI:  https://doi.org/10.1002/smtd.71106
  12. J Am Chem Soc. 2026 Oct 14. 148(40): 43050-43060
      The independent manipulation of chemical functionality over the equilibrium morphology in conventional block copolymer (BCP) self-assembly is intrinsically hindered due to the tight composition-structure coupling. Here, we report a synthesis strategy that breaks this constraint by employing self-assembled ABC triblock terpolymer base materials with a gyroid nanoarchitecture and one cross-linked end block as robust 3D templates for the spatially defined in-gel functionalization of the tethered non-cross-linked blocks. We demonstrate this generalizable concept with selective amine attachment in the C end block for selective metal ion coordination, uptake, and nanostructure-directed metal nanoparticle synthesis. Additionally, phase-confined sulfonation is achieved selectively on both the middle B and end C blocks, respectively, producing, to the best of our knowledge, the first monolithic gyroidal hydrogels exhibiting tunable swelling up to 600 vol % and nanoconfined hydration while maintaining structural integrity. Combined sequential and block-selective functionalization generates a nanostructured, pH-responsive polyampholyte material bearing blocked cationic and anionic polymer chains tethered to the continuous and cross-linked gyroidal network. The achieved decoupling of structural and chemical versatility in these cross-linked BCP gels provides a modular platform and design paradigm for studying nanoconfined synthesis, nanoarchitected ion-exchange membranes, and stimuli-responsive smart materials.
    DOI:  https://doi.org/10.1021/jacs.6c09785
  13. Trends Biotechnol. 2026 Oct 20. pii: S0167-7799(26)00410-5. [Epub ahead of print]
      Biological carbon fixation is currently limited to seven naturally occurring pathways. Synthetic carbon fixation pathways have the potential to surpass natural aerobic pathways in efficiency, but none have been realized in living cells. Here, we present the reductive methylaspartate cycles, a family of four energy-efficient aerobic CO2 fixation pathway variants. These cycles have the potential to outperform the yields and/or rates of the Calvin cycle and previously proposed synthetic CO2 fixation cycles. To realize these designs, we adopted a modular engineering approach in Escherichia coli. Several pathway modules, up to a cascade of 11 enzymes, were realized via engineering and evolution. We demonstrate crotonyl- coenzyme A carboxylase-dependent growth under both elevated and ambient CO2 conditions, and we show in vitro activity of the other CO2-fixing 2-oxoglutarate carboxylase, which requires further activity optimization for mesophilic temperatures. This article demonstrates important steps toward realizing efficient synthetic carbon fixation pathways in living organisms.
    Keywords:  E. coli; biological carbon fixation; metabolic engineering
    DOI:  https://doi.org/10.1016/j.tibtech.2026.09.019
  14. ACS Synth Biol. 2026 Sep 18. 15(9): 3712-3726
      Polyhydroxyalkanoates (PHAs) are bio-based polyesters with the potential to replace petroleum-based products. However, their thermal and mechanical properties are limited by the composition of the monomers used to make them. Current approaches to expanding monomer diversity require individualized pathway engineering for each targeted monomer, limiting the scalability of PHA design. In this work, we establish polyketide synthases (PKSs) as a modular and programmable platform for expanding PHA monomer diversity with variable chain length and branching. Using Pseudomonas putidaas a host, we integrate four engineered PKSs and their variants with heterologous CoA-activating enzymes and short-chain-length PHA polymerases to produce diverse (R)-3-hydroxyacid monomers with defined substitution and branching at the ɑ- and β-positions and enable their in vivo polymerization. We also apply active learning-assisted directed evolution to improve the heterodimeric PHA polymerase CapPhaEC, achieving a 3.6-fold increase in incorporation of α-branched monomers. Leveraging the modularity of PKSs, we demonstrate the biosynthesis and polymerization of linear, branched, and aromatic monomers by exchanging acyltransferase (AT) and ketoreductase (KR) domains to control chain length, branching, and stereochemistry. This study illustrates the utility of using a flexible, programmable PKS platform for rapidly designing and testing new-to-nature PHAs.
    Keywords:  Pseudomonas putida; acyl-CoA; metabolic engineering; polyhydroxyalkanoates; polyketide synthases; protein engineering
    DOI:  https://doi.org/10.1021/acssynbio.6c00363
  15. Nature. 2026 Oct 21.
      The ability to create protein scaffolds that impart enantioselectivity to simple, readily available metal catalysts could redefine the landscape of asymmetric catalysis. Artificial metalloenzymes (ArMs), hybrid catalysts that combine a synthetic metal cofactor with a protein scaffold, offer a potential means to achieve this goal, but scaffold discovery has remained constrained by trial-and-error approaches and the functional limits of extant proteins.1-5 This challenge is acute for metal polypyridine photocatalysts, which are widely used in visible-light chemistry but have not enabled highly enantioselective photocatalysis within protein scaffolds. In this study, we show that generative protein design6-8 can create de novo scaffolds that selectively bind these photocatalysts and that directed evolution converts the resulting artificial metalloenzymes into efficient, highly enantioselective photocatalysts9. The evolved proteins support diverse light-driven reactions, high catalyst turnover and catalyst recycling, and can function with commercially available racemic metal complexes. Spectroscopic studies show that the protein environment extends the photocatalyst excited-state lifetime and organizes substrate near the cofactor, altering energy transfer and controlling stereoselectivity. These findings establish de novo protein design as a route to functional scaffolds for synthetic metal complexes that lack natural protein partners and provide a strategy for combining protein design and evolution to control non-natural catalytic chemistry.
    DOI:  https://doi.org/10.1038/s41586-026-11317-6
  16. N Biotechnol. 2026 Oct 23. pii: S1871-6784(26)00123-8. [Epub ahead of print]
      The production of recombinant biopharmaceuticals is a billion-dollar industry, with numerous high-value proteins expressed in the bacterium Escherichia coli. Many recombinant protein production (RPP) systems enable the synthesis and purification of large amounts of soluble recombinant protein. However, such systems are often too strong to allow the expression of difficult-to-fold proteins, such as membrane proteins, with high-level RPP resulting in the production of insoluble aggregates (i.e., inclusion bodies), target protein degradation and even cell death. To aid the production of problematic proteins, we have engineered the E. coli lite strains in which the plasmid copy number regulator pcnB has been disrupted to allow expression levels of protein targets to be immediately lowered. Using the E. coli lite strains, we express a variety of proteins including green fluorescent protein (GFP), human growth hormone (hGH) and three toxic membrane proteins (BamAENm, LetBEPEC and YiaM). We show that the E. coli lite strains are able to substantially lower the expression of target proteins and alleviate the cellular toxicity associated with producing membrane-localised proteins. Additionally, we show that the E. coli lite strains are extremely versatile, functioning with a variety of RPP systems, including lac-, T7 RNA polymerase- and paraBAD-based systems, and operate under different expression and growth regimes. Thus, the E. coli lite strains can be used to quickly lower expression levels of complicated target proteins to improve both protein production and cell growth.
    Keywords:  Escherichia coli; Recombinant protein production; membrane proteins; plasmid copy number
    DOI:  https://doi.org/10.1016/j.nbt.2026.10.011
  17. Biomacromolecules. 2026 Oct 12. 27(10): 6311-6327
      Silk fibroin hydrogels are a promising platform for tissue engineering due to their biocompatibility and tunability, yet efficient cell recovery from gels remains a challenge. This work synthesizes reversible hydrogels by electrostatically-crosslinking carboxylated silk with linear and branched polyamine. Solvent choice (water, saline, or medium) and protein concentration impacted gel stiffness, mesh size, degradability, and function as an in vitro culture substrate. Hydrogels flowed as a liquid and recovered their viscoelastic properties when cycled under shear. Unlike enzymatically-crosslinked silk hydrogels, β-sheet content did not significantly increase during culture. Encapsulated mesenchymal stem cells proliferated, and live cells were recovered with high efficiency (>90%) by disrupting gels with shear. Lower protein concentrations resulted in hydrogels with lower stiffness, larger mesh size, and increased cell recovery. Electrostatic crosslinking of carboxylated fibroin is a viable route to silk hydrogels that permit encapsulation and subsequent retrieval of live stem cells for regenerative engineering applications.
    Keywords:  cell culture; electrostatic crosslinking; injectable hydrogel; reversible hydrogel; silk fibroin
    DOI:  https://doi.org/10.1021/acs.biomac.5c02745
  18. ACS Synth Biol. 2026 Sep 18. 15(9): 3664-3675
      Despite phospholipid backbone divergence between Archaea (ether-isoprenoid/glycerol-1-phosphate membranes) and Bacteria/Eukarya (ester-fatty acid/glycerol-3-phosphate membranes), known as the "lipid divide", inositol headgroups are conserved across all domains. Inositol lipids from thermophilic archaea form exceptionally stable liposomes but are difficult to obtain at scale. Here, we engineered eukaryotic Saccharomyces cerevisiae for heterologous biosynthesis of unsaturated archaetidylinositol, revealing unexpected promiscuity of endogenous yeast enzymes toward archaeal substrates. Metabolic engineering achieved production levels of 45.6 ± 6.2 mg/g DCW, substantially exceeding endogenous phosphatidylinositol level measured in the same strain (4.8 ± 1.0 mg/g DCW) by >8-fold, which enabled detailed structural, physiological, and biophysical characterization of unsaturated archaetidylinositol for the first time. Production triggered pleiotropic lipid metabolism changes and enhanced thermotolerance, with engineered yeast retaining 57% viability after 40 min at 50 °C, a condition that eliminates chassis strain viability. Purified archaeal inositol lipid formed stable liposomes, which maintained integrity upon heat shock treatment at 95 °C or during 4 week storage at 4 °C, while eukaryotic lipid-derived vesicles exhibited substantial cargo leakage under identical conditions. This yeast platform will enable access to versatile archaetidylinositol derivatives with tailored bioactivity and material properties for both evolutionary studies and biotechnology applications.
    Keywords:  Saccharomyces cerevisiae; archaetidylinositol; lipid divide; liposome; metabolic engineering; thermostability
    DOI:  https://doi.org/10.1021/acssynbio.6c00268
  19. ACS Macro Lett. 2026 Oct 20. 15(10): 1558-1564
      Chemically recyclable and/or biobased polymers are promising alternatives to conventional petroleum-derived plastics, yet strategies that simultaneously improve their performance and recyclability remain scarce. Here, we report that the combined use of thermal denaturation and dynamic covalent chemistry can transform protein materials into strong, chemically recyclable bioplastics with enhanced hydrolytic stability. Cross-linking a priori brittle bovine serum albumin (BSA) with dynamic vinylogous urethane (VU) linkages produces robust plastics with tensile strengths of up to 35 MPa. Simultaneously, thermal denaturation at 80 °C restructures BSA from α-helices into more hydrophobic β-sheet-rich domains, reducing water absorption and thereby stabilizing the otherwise hydrolyzable VU cross-links. The resulting protein networks are chemically recyclable in acidic water, allowing the recovery of both BSA and cross-linkers. Overall, by exploiting the reciprocal interplay between dynamic covalent cross-linking and protein thermal denaturation, this work offers a fresh perspective to overcome the trade-off between polymer stability and recyclability.
    DOI:  https://doi.org/10.1021/acsmacrolett.6c00434
  20. Biotechnol J. 2026 Oct;21(10): e70328
      Microbial cell factory development requires iterative optimization of enzymes, pathway fluxes, and cell traits to achieve efficient and robust production of target chemicals. However, the complexity of intracellular metabolic networks often limits predictable identification and control of engineering targets. Genetically encoded metabolite-responsive RNA biosensors based on aptamer recognition and riboswitch- or ribozyme-mediated regulation have emerged as versatile tools for linking intracellular metabolite levels to measurable or selectable outputs. Their rapid signal transduction, compact genetic architecture, and low metabolic burden make them attractive for high-throughput screening and dynamic regulation. This Review adopts a hierarchical engineering framework that examines RNA biosensor applications across progressively broader levels, from enzyme engineering to pathway-level regulation and host-level cellular trait engineering. We further discuss their molecular organization and technological evolution, including ligand recognition, regulatory coupling, sensor tuning, and computational approaches. Finally, challenges associated with sensor robustness, host dependency, scalability, and translation into production-relevant phenotypes are discussed together with opportunities in cell-free characterization and data-driven design. This hierarchical perspective highlights RNA biosensors as engineering interfaces connecting intracellular sensing with interventions across multiple scales of microbial cell factory engineering.
    Keywords:  RNA sensing element; RNA‐based biosensor; metabolic engineering; microbial cell factory; synthetic biology
    DOI:  https://doi.org/10.1002/biot.70328
  21. ACS Polym Au. 2026 Oct 14. 6(5): 1455-1467
      Designing sustainable polymer materials that combine mechanical robustness with recyclability remains a significant challenge. Here, we report a cellulose-based Diels-Alder (DA) cross-linked network that integrates structural strength, thermoreversible recyclability, and tunable biodegradability. Cellulose was functionalized with furfurylamine via carbamate formation to introduce furan moieties while minimizing perturbation of its π-electron system, yielding furfuryl carbamate cellulose (FC). By controlling the degree of substitution, FC was designed to enable efficient cross-linking through DA reactions while preserving the inherent biodegradability of cellulose. The DA cross-linked networks were prepared by reacting FC with 1,6-bis-(maleimido)-hexane (BMI) via solvent casting. The resulting films exhibited tunable mechanical properties with increasing BMI content, with Young's modulus ranging from 0.4 to 3.1 GPa and maximum stress ranging from 20 to 56 MPa, while maintaining relatively high toughness. Chemical recycling was enabled through thermally induced retro-DA reactions in solution, followed by reformation from solution. Enzymatic degradation tests using cellulase showed that uncross-linked FC degraded rapidly, whereas cross-linked networks exhibited suppressed yet persistent degradation. This demonstrates that degradation behavior can be systematically controlled by cross-linking density. This work provides a molecular design strategy for constructing cellulose-based polymer networks that balance mechanical performance, recyclability, and controlled end-of-life behavior.
    Keywords:  Diels–Alder reaction; biomass-derived materials; cellulose; cross-linking density; dynamic polymer networks; enzymatic degradation; recyclable polymers
    DOI:  https://doi.org/10.1021/acspolymersau.6c00135
  22. ACS Synth Biol. 2026 Sep 18. 15(9): 3784-3794
      Cell-free gene expression in microcompartments constitutes a chassis for biotechnology and synthetic biology. Protein synthesis from low DNA concentrations, including a single copy per compartment, is essential for in vitro evolution of biomolecules and synthetic cells. However, insufficient protein yields from typically subpicomolar DNA inputs result in undetectable signals or inadequate activity of desired protein functions. Here we identify and largely mitigate yield-limiting bottlenecks of reconstituted in vitro transcription and translation (IVTT) at low DNA input. Systematic comparison of commercial reconstituted IVTT kits revealed that gene expression becomes limited by mRNA scarcity within the 20-200 pM DNA-input range. We further uncovered that the standard ribosome concentration is excessive at low-DNA input and shortens the lifetime of translation. These findings led to a simple optimization recipe that combines supplementation with a commercial highly active T7 RNA polymerase reagent and a reduction in ribosome concentration, which synergistically amplified gene expression by ∼10-fold across diverse fluorescent proteins and enzymes. This low-DNA-optimized formulation in picoliter droplets achieved ∼94 nM protein expression from a single copy of a PCR-derived linear DNA template (∼0.12 pM). The user-friendly boosted IVTT protocol paves the way for straightforward functional screening and in vitro reconstitution of cellular functions in DNA-scarce environments.
    Keywords:  PURE system; cell-free gene expression; droplet screening; in vitro evolution; in vitro transcription and translation (IVTT); synthetic cell
    DOI:  https://doi.org/10.1021/acssynbio.6c00471