bims-enlima Biomed News
on Engineered living materials
Issue of 2026–10–18
seventeen papers selected by
Rahul Kumar, Tallinna Tehnikaülikool



  1. ACS Appl Polym Mater. 2026 Oct 09. 8(19): 18000-18009
      The design of engineered living materials (ELMs) that integrate active cells offers opportunities to create dynamic, adaptive systems. However, current methods often use bulk hydrogels that can immobilize cells and limit their growth and migration, which affects their overall functionality for use as an ELM. Here, we developed a granular hydrogel composite composed of hydrogel particles (i.e., microgels), Escherichia coli (E. coli), and a cross-linkable polymer that can be crosslinked with light exposure when desired. We investigated the influence of matrix composition and incubation conditions on microcolony morphology and mechanical properties and observed that the addition of microgels to the composite results in larger bacterial colonies with roughened morphologies and that the granular hydrogel composite compressive modulus is dependent on the matrix composition and incubation conditions. To further demonstrate the potential of this system, we also showed that the granular hydrogel composites can be 3D printed into specified geometries, that the composites can be used for sustained release of bacteria, and that the un-crosslinked matrix supports chemotactic migration, producing cell density gradients that can be fixed in place with crosslinking. Overall, the granular hydrogel composites provide an approach for the fabrication of ELMs.
    Keywords:  Bacteria; confinement; engineered living materials; granular hydrogels; mechanics
    DOI:  https://doi.org/10.1021/acsapm.6c03807
  2. Adv Sci (Weinh). 2026 Oct 14. e78082
      Engineered living materials (ELMs) are emerging as a new class of autonomous and self-maintainable systems that integrate metabolically active organisms within structural scaffolds to create materials capable of sensing, self-repair, adaptive response, and long-term functional persistence. Unlike conventional smart materials, which remain externally programmed and limited in regenerative capacity, ELMs leverage the intrinsic capabilities of microorganisms, fungi, algae, and mammalian cells to support continuous environmental interaction and feedback-regulated behavior. These systems retain metabolically active biological components that can grow, sense, communicate, adapt, and, in some cases, self-repair and self-regenerate, positioning autonomy as the defining capacity of these next-generation materials. Recent advances in synthetic biology, including programmable gene circuits, quorum-sensing communication, and metabolic engineering, enable living components to execute closed-loop decision-making and maintain functionality with minimal external input. These capabilities are driving innovations across construction, agriculture, environmental remediation, bioenergy, and biomedicine, where ELMs enable functions such as damage-triggered mineralization, adaptive pollutant degradation, and therapeutic self-regulation. Despite this promise, key challenges remain in evolutionary stability, biocontainment, long-term viability, and scalable manufacturing. This Review examines the design principles, current challenges, and translational pathways toward self-maintainable and autonomous living materials capable of sustained operation in real-world environments.
    Keywords:  autonomous materials; biohybrid scaffolds; closed‐loop feedback regulation; engineered living materials; self‐maintainable systems; stimuli‐responsive biomaterials; synthetic biology
    DOI:  https://doi.org/10.1002/advs.78082
  3. Front Syst Biol. 2026 ;6 1943876
      The integration of living systems into architecture is advancing rapidly through developments in biotechnology, materials science, and design approaches grounded in regenerative principles. Engineered Living Materials (ELMs) and living artefacts demonstrate how microbial systems can be embedded within materials to enable responsiveness, metabolic activity, and adaptive functionality. However, current applications remain largely confined to discrete material components, overlooking the complex and dynamic microbial ecosystems already present within buildings. This opinion paper introduces the concept of the archibiome as a framework for extending ELMs from isolated systems to interconnected architectural environments. The archibiome conceptualizes buildings as dynamic microbial ecosystems in which engineered systems, material interfaces, and native microbial communities interact across spatial and temporal scales. While this shift offers opportunities for adaptive and regenerative design, it also introduces challenges related to system stability, environmental variability, biosafety, and regulatory constraints. Addressing these challenges requires interdisciplinary approaches that integrate microbial ecology, materials engineering, architectural design, and regulatory science. Ultimately, the archibiome positions microbial life as a design variable, enabling a transition toward predictive, systems-level strategies for living architecture.
    Keywords:  archibiome; built environment; engineered living materials; microbial ecology; microbiome; probiotic design; regenerative architecture; sustainable design
    DOI:  https://doi.org/10.3389/fsysb.2026.1943876
  4. Nature. 2026 Oct 14.
      De novo design of enzymes that cleave amide bonds represents a major challenge1,2. Here we use RFdiffusion methods3,4 to de novo design proteins with water-activating zinc-based active sites adjacent to a peptide substrate binding pocket. Of 135 designs tested, 36% catalyse cleavage of their cognate peptide substrates at the targeted scissile bond. The best design accelerates peptide-bond hydrolysis by more than 108-fold relative to the uncatalysed reaction; four substitutions increase this acceleration to more than 1010-fold by improving active-site preorganization5. We use this approach to design metalloproteases that selectively cleave the human disease-associated proteins TDP-43, amyloid-β and serum amyloid A, with rate enhancements of up to 109-fold. We further design caged cytokines and receptor antagonists that are selectively activated by the designed proteases, enabling bioorthogonal control of cell state. Thus, de novo design can yield highly active, programmable proteases with applications in therapeutics, biotechnology and bioremediation.
    DOI:  https://doi.org/10.1038/s41586-026-11167-2
  5. J Mater Chem B. 2026 Oct 12.
      Tissues are living, water-swollen composite polymer networks whose dynamic biochemical composition, hierarchical architecture, and mechanics collectively regulate cell behavior and physiological function. Recreating these properties across biological and biomedical contexts (e.g., 2D and 3D cell culture, tissue engineering, organoid culture, and regenerative medicine) remains a critical challenge as existing synthetic matrices cannot fully recapitulate the multiscale organization and dynamic properties of native extracellular matrices. Most hydrogel platforms rely on "drag-n-drop" combinations of polymers, crosslinkers, fabrication methods, and bioactive motifs to approximate the biophysical and biochemical properties of an individual tissue or biomedical context. In this Review, we seek to motivate the pursuit of thermogel-based "plug-n-play" approaches by framing tissues as synthetic targets and examining the potential of polymers that undergo thermally-triggered assembly to serve as modular building blocks for next-generation synthetic ECMs. The ultimate goal is a universal framework for programming composition, structure, mechanics, and biofunction from a common multiscale molecular design language. We first closely examine the composition, assembly, and properties of ECMs to clearly establish targets of interest and processes that may serve as inspiration. Finally, we connect the thermodynamic principles of lower critical solution temperature behavior with macromolecular topology, phase separation, and hierarchical assembly to establish design opportunities for creating thermogelling polymers that more closely mimic the fibrous, hydrated, mechanically adaptive, and cell-instructive nature of native ECMs. We propose that future progress will require the integration of precise polymer synthesis, topology-dictated assembly, macromolecular crowding, high-throughput formulation, and multiscale characterization to establish predictive structure-assembly-property relationships. This framework is intended to facilitate the transition of thermogelling polymers from injectable or temperature-responsive materials to a latent scalable synthetic platform for writing bespoke tissue-like microenvironments from molecularly programmed building blocks.
    DOI:  https://doi.org/10.1039/d6tb01038e
  6. Science. 2026 Oct 15. eaeh2982
      The catalytic and other sophisticated functions of biomolecules arise from the placement of many atoms in three-dimensional space. Here, we describe a generative artificial intelligence method for biopolymers, RFdiffusion3 (RFD3), which employs free atom diffusion to satisfy complex sets of atomic constraints more rapidly and accurately than previous methods across several challenges from enzyme design to RNA structure design. We demonstrate experimentally the power of the RFD3 pipeline for enzyme design by designing de novo phosphotriesterases with a complex active site architecture incorporating a carbamylated lysine coordinating two metal ions and zinc proteases specific for the transthyretin protein involved in amyloid diseases; in both cases we obtain active catalysts in zero shot 96 construct design campaigns.
    DOI:  https://doi.org/10.1126/science.aeh2982
  7. Nat Commun. 2026 Sep 15. pii: 10821. [Epub ahead of print]17(1):
      Navigating a vast formulation-preparation design space that is highly sensitive to perturbations makes trial-and-error approaches inefficient and costly for diverse clinical needs. Here, we introduce an expert-mimic AI framework called E-MAF that integrates a process-aware surrogate with an optimized genetic algorithm to emulate coarse-to-fine reasoning, autonomously generating lab-ready designs tailored to desired release profiles. We show that E-MAF delivers on-demand release and shortens design cycles from 6-12 months to approximately 1 hour. We demonstrate that in vitro release, in vivo pharmacokinetics and therapeutic effects match or surpass commercial benchmarks across 7 active pharmaceutical ingredients. We show that E-MAF also enables release profiles that are hard to achieve by conventional approaches, exemplified by ≤2% risperidone burst within 1 h and near-zero-order release over ~28 days in vivo. These results demonstrate E-MAF's potential to accelerate polymeric controlled-release system development and drug-delivery industrialization.
    DOI:  https://doi.org/10.1038/s41467-026-77619-5
  8. Adv Sci (Weinh). 2026 Oct 11. e78047
      Engineering biopolymer-based hydrogels with robust load-bearing capacity, reversible mechanical programmability, and adaptive actuation remains difficult due to weak physical crosslinking and porous structure. Inspired by the mutable dermis of sea cucumbers, a collagen-alginate double-network elastomeric (CoDE) hydrogel integrates a covalently crosslinked collagen cryogel scaffold with an ionically crosslinked alginate sacrificial network. This hydrogel system is inherently biocompatible and biodegradable. Compression-induced scaffold densification and ionic locking enable broad tuning of the compressive response, sustaining programmable peak stresses up to 16 MPa. CoDE exhibits reversible lock-unlock states while fully preserving its peak stress, elastic modulus, and energy dissipation after repeated loading to 85% compressive strain. Cyclic compressive loading mechanically "trains" the biopolymer hydrogel by altering its microstructure. Chemically triggering the release of stored elastic energy in the biopolymer network generates actuation forces. Further, CoDE is tested as a bio-inspired, externally driven swimmer that can be subjected to large-scale, repetitive deformation with predictable kinematics that match finite-element simulations at the device level. The CoDE platform has future applications for building soft-material machines for adaptive soft robotics, dynamic biointerfaces, and mechanically instructive biomaterials.
    Keywords:  biopolymers; bio‐inspired materials; double‐network hydrogels; fatigue resistance; marine‐inspired; programmable mechanics; soft robotics
    DOI:  https://doi.org/10.1002/advs.78047
  9. Angew Chem Int Ed Engl. 2026 Oct 10. e7802784
      Naturally occurring biomolecular condensates orchestrate key cellular processes by creating spatially distinct reaction environments, yet engineering synthetic condensates that combine structural programmability with spatioselectively encoded function remains challenging. Here, we report multiphase DNA-RNA artificial cells (ACs) that embed functional RNA condensates as organelle-like compartments within programmable DNA core-shell ACs. A single thermal assembly protocol yields three-phase ACs comprising a glassy RNA core organelle embedded in a liquid-like DNA compartment, surrounded by a crosslinked DNA shell. The RNA organelles contain aptamer function, enabling selective protein recruitment and small-molecule activation, while the DNA scaffold provides independent addressability, modulates RNA-condensate size, and enhances resistance to serum-mediated degradation. We further show that RNA chemistry can be used to adjust environmental responsiveness: unmodified RNA organelles undergo rapid degradation in serum and release captured protein cargo, whereas 2'-fluoro-modified RNA organelles remain stable for at least 24 h. Finally, by coupling transcriptional modules localized in the DNA core to cell-free protein translation in the surrounding medium, we establish sender-receiver communication between AC populations and self-actuating signal processing within individual DNA-RNA ACs. These results establish hybrid nucleic-acid ACs as programmable, spatially organized systems that couple compartment architecture, RNA molecular recognition, and biochemical communication.
    Keywords:  aptamers; artificial cells; compartmentalization; condensates; nucleic acid phase separation; signal processing; synthetic biology; synthetic cells; transcription; translation
    DOI:  https://doi.org/10.1002/anie.7802784
  10. Sci Adv. 2026 Oct 16. 12(42): eaef5042
      Bioelectronic interfaces must mechanically conform and adapt to biological tissues while maintaining stable electrical performance during motion and deformation. Existing soft conductors, however, often couple mechanical strain to electrical resistance, accumulate interfacial stress, and hinder reprocessing. Here, we report nanowire viscoplastic composites that combine silver nanowires with a dynamically crosslinked, short-chain polyborosiloxane matrix to produce emergent electromechanical behavior. The viscoplastic matrix permits deformation-induced nanowire reorganization, yielding high conductivity enhanced with strains. It also imparts fast stress relaxation, controllable yielding, and plastic conformability, enabling stress-free, mechanoadaptive contact with biological tissues. The material is self-healing, reconfigurable, and solvent-processable for recycling. It forms stable adhesion across porcine, rat, and human skin; accommodates hair regrowth; and exhibits excellent cytocompatibility and antibacterial function. As dry electrodes, these composites exhibit low impedance and resolve perilaryngeal muscle fatigue through high-resolution surface electromyography in humans. This work expands the materials design space for bioelectronic interfaces.
    DOI:  https://doi.org/10.1126/sciadv.aef5042
  11. ACS Appl Mater Interfaces. 2026 Oct 15.
      Mechanochemical reactions involve the use of applied mechanical distortions to reactants to drive chemical reactions. In this work, we demonstrate the use of mechanical force to direct location-specific reactions on suspended bilayer graphene microdrums, by manipulating their geometric landscape, through the introduction of standing-wave oscillations using an atomic force microscope (AFM) probe. By introducing these oscillations into the suspended membrane while it is held in contact with an underlying reactant medium (e.g. water), the mechanically induced oxidation of graphene is observed, whereby the greatest reactivity is seen to occur at the peaks of the induced standing waves, which correspond to the regions of highest local strain in the graphene bilayers. Mapping these reactive regions using Raman microspectroscopy reveals that the radial position of the highest regions of reactivity depends on the applied oscillation frequency, beginning at the center of the microdrums at low frequencies (ca. 1-20 kHz), and then expanding outward at frequencies above 100 kHz. From finite element modeling (FEM) of the frequency-dependent mechanics of the membranes, this change in shown to be consistent with the radial redistribution of the regions of the highest local curvature of the graphene. The ability to use mechanical distortions to drive location-specific functionalization of 2D materials such as graphene provides a new route to the design of nanoscale devices and site-directed catalysis on such materials.
    Keywords:  2D materials; acoustic actuation; finite element modeling; site-specific reactivity
    DOI:  https://doi.org/10.1021/acsami.6c10502
  12. Nat Commun. 2026 09 11. pii: 10732. [Epub ahead of print]17(1):
      Biohybrid robots use engineered living muscle tissue as actuators, offering self-organization, adaptability, and self-healing. Current designs focus on improving muscle physiology but overlook the interplay between muscle and scaffold in the robot's function. We present a computational and experimental pipeline to co-optimize the form and function of centimeter-scale bioactuators. Using a soft-body simulation framework, we modeled unified muscle-scaffold systems and applied an evolutionary algorithm and targeted parameter sweeps to maximize range of motion. The resulting bioactuators, fabricated by integrating skeletal muscle tissue with microgrooved hydrogel scaffolds, feature a continuous interface enabling efficient force transmission and large, rapid deformations. They achieved up to an eleven-fold increase in range of motion over previous designs of similar muscle volume, powering robots capable of jumping, swimming, walking, and gripping, and scalable into multi-unit systems. By unifying modeling, optimization, and fabrication, we demonstrate how such a pipeline accelerates the development of high-performance biohybrid robots.
    DOI:  https://doi.org/10.1038/s41467-026-77655-1
  13. Adv Mater. 2026 Oct 12. e75347
      Oral tumors are not shaped by biochemical signals alone; they also evolve within mechanically active and thermally fluctuating microenvironments that critically regulate malignant progression, immune remodeling, and therapeutic resistance. Here, we develop a dynamic bioorthogonal organoid platform that couples a 3D-printed photothermal elastic scaffold with an interpenetrating hydrogel network derived from decellularized oral mucosa extracellular matrix, enabling the reconstruction of in vivo-like structural support, matrix-derived biochemical cues, spatial cellular compartmentalization, and dynamic physical stimulation. Through click chemistry-mediated cell anchorage and hydrogel encapsulation, oral cancer cells and macrophages are spatially organized into a compartmentalized cancer-immune niche. Under cyclic mechanical stretch and near-infrared-triggered periodic photothermal stimulation, dynamic culture markedly enhances cancer cell proliferation and glycolytic reprogramming while concomitantly polarizing macrophages toward a pro-tumoral M2 phenotype. In both monoculture and coculture settings, biochemical-mechano-thermal stimulation substantially increases cancer cell chemoresistance. Mechanistically, these biochemical-physical cues activate stress-adaptive and survival programs while enriching cancer stem-like populations. In a xenograft mouse model exposed to in vivo biochemical, mechanical and thermal stimulation, dynamic conditioning markedly accelerates tumor progression, enhances metastatic potential, and confers pronounced chemoresistance. Together, this study establishes a biomimetic multicellular tumor platform for uncovering how dynamic biochemical-physical cues orchestrate cancer-immune crosstalk and therapeutic failure.
    Keywords:  ECM‐derived biochemical cues; biochemical–mechano–thermal stimulation; bioorthogonal engineering and 3D printing; cancer–immune crosstalk; multicellular oral tumor organoid
    DOI:  https://doi.org/10.1002/adma.75347
  14. Lab Chip. 2026 Oct 16.
      Engineering three-dimensional cellular systems with controlled size, matrix composition and cellular organization is central to disease modelling, drug evaluation and regenerative medicine. In this context, cell-laden hydrogel microspheres have emerged as a platform for constructing microscale living units. Their structure facilitates local cell-matrix interactions and cell-cell communication, while the hydrogel phase provides a tunable microenvironment for cell culture and function. Droplet microfluidics offers a powerful route to produce these microspheres with defined size, composition, architecture and cellular input, allowing fabrication parameters to be linked directly with biological outcomes. In this review, we focus on how droplet microfluidics, hydrogel matrix design and cellular organization converge to transform cell encapsulation into the construction of functional 3D cellular units. We outline the principles of microsphere fabrication, including droplet generation, gelation and post-generation recovery, and discuss how hydrogel matrices regulate processability, bioactivity and reproducibility. We then examine how cell loading, spatial architecture and organoid-centered organization determine microsphere function. Finally, we discuss applications in bioanalysis, drug testing, therapeutic delivery and tissue assembly, and highlight key challenges in cytocompatible processing, recovery, reproducibility, standardization and functional validation. This review aims to provide design principles for transforming cell encapsulation into interpretable and deployable microscale living systems.
    DOI:  https://doi.org/10.1039/d6lc00603e
  15. Soft Matter. 2026 Oct 14.
      DNA origami is a powerful method to achieve nanoscale folded structures. DNA origami is typically employed to create precisely and tightly folded objects often in small quantities and studied at single molecule scale. Here, we use the DNA origami method to design and fold polymers with complex topologies, and study their rheology and viscoelastic properties in dense conditions. First, we designed and purified topologically distinct DNA nanostructures - linear, circular, and "tadpole" polymers - to evaluate how polymer architecture influences entanglement and rheology. Despite their distinct topologies, we observe that all constructs obeyed universal rheological scalings, likely due to their short length. However, upon thermal annealing in the bulk, the DNA polymers displayed significantly different behaviours. Our results suggest that DNA polymers could be used to engineer thermoresponsive behaviours in complex fluids by introducing reversible and topology-dependent crosslinking.
    DOI:  https://doi.org/10.1039/d6sm00371k
  16. Sci Adv. 2026 Oct 16. 12(42): eaed1014
      Effective modeling of chronic human diseases in vivo requires precise spatiotemporal regulation of molecular processes at defined tissue locations. Optogenetic and optoelectronic tools can provide such control but targeting internal organs such as the lungs remain challenging. To address this, we developed E-LightR-Cre recombinase, enabling precise, spatially restricted gene activation with no dark-state activity and robust blue light responsiveness. To achieve local activation of E-LightR-Cre in specific organ sites, we engineered wireless, fully implantable optoelectronic devices enabling focal illumination of murine lungs with no discernible organ damage. The size of the activated area is controlled by modulating light intensity and duration. Using implanted optoelectronic devices, we activated E-LightR-Cre in a selected area of mouse lungs and achieved local regulation of targeted genes. Light-regulated expression of the oncogenic KRas-G12D mutant in mouse lungs induced local formation of oncogenic lesions. These results show that our protein engineering and adaptable optoelectronic approaches enable facile application of optogenetic tools for locally controlled disease modeling in vivo.
    DOI:  https://doi.org/10.1126/sciadv.aed1014
  17. Small Sci. 2026 Oct;6(10): e70425
      Additive manufactured electrochemical platforms produced using bespoke conductive filaments are becoming increasingly established within modern electrochemical research; however, the latest developments within the field of additive manufacturing electrochemistry using fused filament fabrication technology have shown that it is constrained by the available material pool. Here, we introduce the first conductive high-density poly(ethylene) (HDPE) filament engineered for additive manufacturing implementation as a new alternative for conductive, chemically resilient filaments which is paramount to unlocking new applications. Using a thermal compounding process that avoids environmentally harmful chemical solvents, 40 wt% carbon black (CB) was incorporated into HDPE and extruded into a flexible, plasticizer-free filament with a low bulk resistivity of 16.4 (±1.0) Ω cm‒ 1. Following printing, electrochemical activation was required to expose the conductive carbon black phase and generate the functional electrode surface, particularly for inner-sphere electron transfer. Optimized additive manufacturing produced electrochemical platforms with reproducible performance and heterogeneous electron transfer kinetics corresponding to 2.93 (±0.19) × 10-3 cm s-1. Electrochemical stability testing revealed that the CB/HDPE additive manufactured electrodes exhibited consistent voltammetric responses for over 60 scans, representing an improvement compared to other conductive polymer feedstocks. Over a 70-day period, the CB/HDPE electrodes also maintained chemical stability following immersion in six different solvents. The material's versatility was demonstrated through proof of concept for the electrosynthetic oxidation of chlorpromazine-to-chlorpromazine sulfoxide and the electroanalytical determination of caffeine in commercial energy and coffee beverages, which was validated against liquid chromatography mass spectroscopy, both in aqueous and organic media. This work establishes conductive HDPE as a new entrant to the additive manufacturing electrochemistry toolkit, expanding the material landscape and enabling applications previously inaccessible with existing polymers.
    Keywords:  3D printing; additive manufacturing; carbon black; composites; electrochemistry; electrosynthesis; high‐density poly(ethylene)
    DOI:  https://doi.org/10.1002/smsc.70425