bims-enlima Biomed News
on Engineered living materials
Issue of 2026–09–27
24 papers selected by
Rahul Kumar, Tallinna Tehnikaülikool



  1. Small. 2026 Sep 24. e75932
      Engineered living materials couple living biochemical activity with synthetic chemical networks yet translating biological processes into reversible structural and mechanical remodeling remains challenging. Here, we report a metabolism-regulated dynamic covalent double network living hydrogel that converts microbial D-glucose consumption into programmable network reconstruction and morphomechanical transitions. The living hydrogel combines a permanent covalent network that maintains structural integrity and microbial confinement, and a phenylboronic acid-poly (vinyl alcohol) dynamic network whose boronate ester equilibrium is regulated by D-glucose. Exogenous D-glucose competitively disrupts dynamic crosslinking, whereas microbial metabolism depletes D-glucose and promotes reconstruction of the dynamic network. This glucose addition-metabolism cycle enables reversible interfacial structural reconfiguration of living hydrogel modules, enhances bulk shrinkage, and converts chemical remodeling into bilayer bending actuation. The hydrogel supports diverse microorganisms, retains spatially confined populations, and undergoes repeated cycles of network reconstruction and mechanical actuation. By integrating actuation and genetically encoded sensing modules, we further construct a potentially recyclable living hydrogel device capable of sequential grasping and IPTG-induced bacterial sensing. This work establishes metabolism-regulated dynamic network reconstruction as a chemical strategy for coupling living biochemical processes with reversible morphology and mechanics in engineered living materials.
    Keywords:  boronate ester chemistry; dynamic covalent hydrogels; engineered living materials; hydrogel actuation; microbial metabolism
    DOI:  https://doi.org/10.1002/smll.75932
  2. Nat Commun. 2026 Aug 24. pii: 10134. [Epub ahead of print]17(1):
      Living materials, owing to their inherent capacities for growth, self-healing, sensing, and adaptation, have attracted widespread attention in recent years. However, controlling growth of living matter to achieve robust and tunable material properties remains a challenge. Here, we report a co-culture strategy that integrates mycelial microfibers with bacterial cellulose nanofibers into hierarchical hydrogels and transparent films. The biological crosslinking between fungal cell wall mannans and cellulose chains yields an interpenetrating micro-nano network with enhanced interfacial hydrogen bonding. As a result, the films achieve simultaneous high tensile strength (195.62 ± 9.06 MPa) and toughness (11.51 ± 0.94 MJ m-3), surpassing most reported biodegradable films. The micro-nano architecture also enables wide-range optical tunability: haze increases from 16.0% to 78.5% while maintaining approximately 80% transparency by controlling culture duration. Mycelium/bacterial cellulose films with tailored properties are promising candidates for applications such as radiative cooling coatings on outdoor displays. This strategy demonstrates a generalizable principle for programming material structure and properties through microbial activity, offering a green pathway toward next-generation sustainable films for transparent radiative cooling, flexible electronics, and optical devices.
    DOI:  https://doi.org/10.1038/s41467-026-76430-6
  3. Adv Mater. 2026 Sep 23. e75116
      Organoid research holds tremendous potential for personalized medicine and drug development. However, current limitations include reproducibility issues largely due to the use of biologically derived materials, which are prone to batch-to-batch variations. Here, we report a chemically defined microgel-based method for human induced pluripotent stem cell (iPSC)-based organoid generation, enabling expansion of iPSCs and their subsequent differentiation within one construct across different scales, including compatibility with automated 384-well plate workflows. Chemically defined poly(ethylene glycol) (PEG)-based microgels are produced via parallelized step-emulsification microfluidics, enabling scalable production. This approach leverages the self-organization of iPSCs with microgels to build three-dimensional constructs, driven by robust cell-material interactions achieved through vitronectin-coated PEG microgels. This technology allows the iPSCs to expand and retain their pluripotency, after which they can be differentiated into the three germ layers, providing a suitable platform for organoid differentiation. This was further extended by differentiation into cardiac organoids and retinal photoreceptors to demonstrate two exemplary tissues.
    Keywords:  cellular differentiation; drug development; germ layer; induced pluripotent stem cell; microfluidics; nanotechnology; organoid; peg ratio; personalized medicine
    DOI:  https://doi.org/10.1002/adma.75116
  4. bioRxiv. 2026 Sep 18. pii: 2026.09.17.752456. [Epub ahead of print]
      Synthetic biology enables the rational reprogramming of microorganisms into living therapeutics and agents for bioremediation. However, such genetically modified organisms (GMOs) disseminate their synthetic genetic information into natural microbial communities through horizontal gene transfer (HGT), posing biosafety risks that limit clinical and environmental deployment. Reassigning sense codons to an alternative amino acid identity establishes a genetic firewall that simultaneously prevents incoming and outgoing gene flow, but reported implementations compromise fitness, precluding clinical and industrial use. Here, we overcome this limitation using genome design and laboratory evolution to create a high-fitness genetically firewalled Escherichia coli commensal. By directly altering the amino acid identity of TCA and TCG serine codons in the genetic code without an unassigned intermediate, we establish a robust genetic firewall that remains stable for thousands of generations. This firewalled commensal stably colonizes the mouse gastrointestinal tract for more than 100 days and blocks viral infections and HGT. As the long-term within-gut evolution of this firewalled organism identified adaptive mutations in genes responsible for carbon source utilization, we rationally redesigned the strain's genome to increase fitness. Together, this work establishes a genetically firewalled commensal for safer living therapeutics development and provides a strategy for designing high-fitness, virus- and gene-transfer-resistant organisms for clinical and environmental use.
    DOI:  https://doi.org/10.64898/2026.09.17.752456
  5. Small. 2026 Sep 24. e75778
      Hydrogels that recapitulate the biochemical and mechanical complexity of the extracellular matrix (ECM) are critical for advanced cell culture and tissue engineering. Here, we develop spider silk protein (spidroin)-based hydrogels from the recombinant miniature spidroin NT2RepCT mixed with VN-NT, a vitronectin peptide fused to the spidroin N-terminal (NT) domain. These hydrogels undergo spontaneous gelation at 37°C under physiological conditions and exhibit tunable stiffness. Structural and functional characterization confirmed stable fibril networks. Inclusion of VN-NT in the gels improved epithelial cell adhesion, monolayer organization, and integrin-linked adhesion formation, while human fetal mesenchymal stem cells exhibited robust viability and migration. Traction force microscopy demonstrated protein concentration-dependent force transmission from cells to the hydrogel matrix. Collectively, these results establish NT2RepCT-based hydrogels as non-toxic substrates with adjustable mechanics and straightforward, modular functionalization with bioactive motifs and proteins, providing a promising platform for mechanobiology studies, stem cell culture, and tissue engineering.
    Keywords:  3D cell culture; biophysics; cell adhesion; cell culture; extracellular matrix; mechanobiology; tissue engineering; vitronectin
    DOI:  https://doi.org/10.1002/smll.75778
  6. Chembiochem. 2026 Sep 28. 27(18): e70526
      Artificial cells are synthetic systems that emulate lifelike behaviors through multilevel molecular architectures capable of sensing and processing information. The high programmability and structural designability of DNA make it one of the most powerful molecular tools for bottom-up artificial cell construction. This review systematically summarizes the expanding roles of DNA in artificial cells, ranging from transmembrane receptors and nanopores to internal reaction networks and cytoskeletal structures and liquid condensates, highlighting the structural and functional units of DNA, as well as its applications in hierarchical organization and communication with living cells. At the same time, we discuss the potential breakthroughs in DNA hybrid materials and nonequilibrium information processing for future artificial cell engineering.
    Keywords:  DNA nanotechnology; artificial cells; hierarchical organization; hybrid material
    DOI:  https://doi.org/10.1002/cbic.70526
  7. Adv Healthc Mater. 2026 Sep 20. e00032
      Scaffold-free tissue engineering enables the construction of biomimetic tissues and organs by preserving cell-cell and cell-matrix interactions while avoiding exogenous scaffolds and biomaterials. Yet current approaches are limited to thin sheets or simple spheroids and often lack cellular maturity and organized extracellular matrix (ECM). Here, anchored cell sheet engineering, a concept that previously introduced anchors to guide the remodeling of cell sheets into more mature fibers or sheets, is extended to achieve seamless, single-step biofabrication of scaffold-free hollow tubular and spherical constructs for sustained biological and mechanical functions under physiological conditions. Using custom culture devices with curved geometries for two-dimensional (2D) culture, continuous confluent cell-ECM layers were formed that were then delaminated and guided by strategically positioned central cores with different shapes and sizes to undergo tension-mediated remodeling into mechanically stable hollow structures. This approach allows modulation of wall thickness, supports multilayered architectures, and yields constructs capable of withstanding fluid flow. By expanding scaffold-free biofabrication beyond sheets and fibers to robust hollow geometries, this work establishes a versatile set of physiologically relevant building blocks for scalable bottom-up assembly of complex, multi-tissue organ-like constructs within a bioassembloid framework.
    Keywords:  anchored cell sheet engineering; hollow tubes and spheres; modular tissue engineering; scaffold‐free tissue engineering
    DOI:  https://doi.org/10.1002/adhm.202600032
  8. Mater Today Bio. 2026 Oct;40 103667
      Mechanical stress plays a critical role in regulating cardiomyocyte structure and physiology. However, mechanobiology studies still rely on static systems that failed to capture the progressive nature of native cardiac remodeling. Building on our prior shape memory polymer (SMP)-based platform, the present study integrates microcontact printing onto SMP substrates to achieve single-cell geometric control and on-demand dynamic mechanical modulation. Using CRISPR/Cas9-engineered MYBPC3- and BAG3-mutant hiPSC-CMs along with isogenic wild-type (WT) control, we systematically assessed sarcomere organization and contractile behavior under static and dynamic mechanical conditions. WT hiPSC-CMs displayed robust morphological adaptability and coordinated sarcomere remodeling in response to dynamic mechanical cues, whereas MYBPC3- and BAG3-deficient hiPSC-CMs exhibited mutation-specific defects in sarcomere integrity and contractile behavior that were exacerbated by dynamic mechanical stress. These results demonstrate that this SMP-based platform enables us to systematically compare genotype-based mechanical sensitivity to develop more severe cardiomyopathy phenotypes.
    Keywords:  Active biomaterials; Disease modeling; Dynamic mechanobiology; Gene editing; Human induced pluripotent stem cells
    DOI:  https://doi.org/10.1016/j.mtbio.2026.103667
  9. ACS Appl Mater Interfaces. 2026 Sep 24.
      Aquatic ecosystems are under stress worldwide due to extreme weather, overfishing, and pollution. Restoration approaches, such as the deployment of artificial reefs, are needed to mitigate this environmental stress. Here, we designed and tested a living artificial reef consisting of a solid calcium carbonate ceramic structure inoculated with microalgae embedded in a hydrogel matrix. The calcium carbonate ceramic structure was sintered at temperatures as low as 500 °C without thermal decomposition in air using only 1 wt % lithium fluoride. Hydrogel encapsulation protected the microalgal cells and allowed them to grow and remain attached to the ceramic surface. We show that small-scale prototype living artificial reefs removed 69 and 81% of the phosphorus and nitrogen, respectively, from estuarine water after incubation in the laboratory for 24 h. Future efforts to optimize geometry, increase scale, and demonstrate field deployment will be necessary to develop this technology as a mechanism to restore nutrient-contaminated aquatic ecosystems.
    Keywords:  artificial reef; calcium carbonate; ceramics; hydrogel; microalgae; nutrient removal
    DOI:  https://doi.org/10.1021/acsami.6c12877
  10. ACS Appl Bio Mater. 2026 Sep 21.
      Recent advances in prototissue construction have highlighted the importance of organizing multiple artificial cells with distinct function and intercellular communication capabilities. Previous approaches, including the use of optical tweezers, phoresis driven by the magneto-Archimedes effect, and 3D-printing, enabled the aggregation of liposome-based artificial cells, but they lacked precise spatial organization of individual artificial cells for large-scale production. Microfluidic devices (MFDs) offer potential for high-throughput prototissue fabrication but have faced challenges in achieving precise ordering of fragile liposomes with diameters exceeding 1 µm. In this study, we demonstrated an MFD incorporating U-shaped microstructures designed for liposome trapping that enables stochastic liposome capture and release, with this process being influenced by differences in the mechanical properties of the liposomal membrane. Based on these findings, we developed a two-step loading strategy, involving the sequential introduction of two liposome types, and successfully arranged them within the trapping microstructures of the MFD. Furthermore, DNA modification of the liposomes enhanced their spatial proximity within the MFD, enabling DNA hybridization and strand displacement reactions between the adjacent liposomal membranes. This MFD platform provides a statistical assay for constructing and analyzing minimal prototissues composed of two heterogeneous micrometer-sized liposomes.
    Keywords:  DNA hybridization; hydrodynamic manipulation; microfluidic device; micrometer-sized liposome; strand displacement reaction
    DOI:  https://doi.org/10.1021/acsabm.6c01189
  11. bioRxiv. 2026 Sep 17. pii: 2026.09.15.751868. [Epub ahead of print]
      Recurrent urinary tract infection (rUTI) is a significant public health problem. The most common cause of rUTI is uropathogenic Escherichia coli (UPEC). Antimicrobial prophylactic and therapeutic regimens for rUTI disrupts the microbiome and leads to infection with antimicrobial resistant organisms. Therefore, there is an urgent need to develop microbiome-sparing alternative approaches for preventing rUTI. Asymptomatic bacteriuria (ABU) E. coli strain 83972 (ABEC) outcompetes UPEC in the urinary tract without causing UTI symptoms, but its limited persistence in the bladder restricts its efficacy. Here, we investigate a device made from an engineered living material (ELM) that releases ABEC in a sustained manner as an antibiotic-free platform against UTIs and rUTIs. Using physiologically relevant in vitro models incorporating human urothelial cells, human urine, and periodic urine exchange, we show that ABEC-releasing ELMs suppress UPEC proliferation and inhibit UPEC attachment to and invasion into urothelial cells, particularly when ABEC is maintained at equal or higher levels than UPEC. Because ELMs continuously release ABEC, they sustain competitive pressure even as planktonic bacteria are cleared during voiding, outperforming a single dose of free-floating ABEC. In a rUTI model, sustained ABEC release from ELMs reduces the proliferation and reinvasion of UPEC expelled from infected urothelial cells, while UPEC infiltration into fractured ELMs remains negligible. Finally, we design a first-generation ELM device that can be transurethrally delivered and retained within the mouse urinary bladder, achieving sustained ABEC release in vivo, with ABEC persisting in the bladder, kidneys, and urine for at least 4 days. In summary, we report the development of an ELM device that continuously releases ABEC to suppress UPEC proliferation and urothelial cell invasion in in vitro models of rUTI, and demonstrate sustained ABEC release in vivo in a mouse bladder.
    DOI:  https://doi.org/10.64898/2026.09.15.751868
  12. Biomater Adv. 2026 Sep 18. pii: S2772-9508(26)00472-3. [Epub ahead of print]190 215172
      Three-dimensional (3D) bioprinting requires inks and bioinks that combine appropriate processing and mechanical properties with a biologically supportive environment capable of sustaining cell viability and proliferation. Silk-based biomaterials have attracted considerable attention in biofabrication due to their tunable properties, processability, and structural similarity to extracellular matrix components. While most silk-based inks/bioinks rely primarily on silk fibroin (SF) for structural integrity, the use of silk sericin (SS) as a cell-supportive component remains comparatively underexplored in bioprinting. As a hydrophilic protein, SS has been associated with favorable cell responses, including cell adhesion and proliferation. Additionally, SS has been reported to support cell growth in culture media, or to replace fetal bovine serum (FBS). These characteristics have motivated the exploration of sericin in formulations intended for cell encapsulation Furthermore, as a by-product of the silk industry, SS is a sustainable protein source, providing an environmental dimension to its biomedical use. In the current study, we combined both silk proteins to develop a proof-of-concept bilayer silk-based printed construct. SS-based hydrogels were formulated with gelatin and glycerol to encapsulate human dermal fibroblasts (HDFs), while SF-based ink was incorporated into the 3D printing process as a structurally supportive biomaterial. The inks/bioinks were processed using extrusion-based 3D bioprinting and subsequently crosslinked through an enzymatic horseradish peroxidase/hydrogen peroxide (HRP/H₂O₂) system to stabilize the hydrogel network. These structures supported HDF viability and proliferation under the tested in vitro conditions. Overall, these results highlight the potential of silk proteins as a proof-of-concept 3D bioprinting platform that combines a SF-based structural support ink with a sericin-containing cell-laden bioink in which HDF viability and proliferation were supported under the tested in vitro conditions.
    Keywords:  3D bioprinting; Ink/bioink; Silk fibroin; Silk sericin
    DOI:  https://doi.org/10.1016/j.bioadv.2026.215172
  13. Bioact Mater. 2027 Feb;68 835-847
      Reconstituted collagen hydrogels offer the bioactivity that load-bearing tissue engineering requires, but their Pascal to low-kPa moduli have confined them to non-structural roles, and the synthetic and hybrid strategies that close the mechanical gap typically forfeit that bioactivity. We show that a twist-induced densification process resolves this tradeoff in a controllable way, converting soft collagen hydrogel fibers into superhelical hydrogel yarns whose mechanics can be prescribed from fabrication parameters. A parameter-free model drawn from fiber-network mechanics predicts the modulus enhancement from densification, fibril alignment, and helical fiber architecture, and the same surface helix angle independently predicts the nonlinear strain-stiffening response. The resulting yarns exhibit modulus, strength, and toughness approaching the lower range reported for native tendons, representing enhancements of two to three orders of magnitude over the as-fabricated collagen hydrogels. Importantly, they remain amenable to braiding, knitting, and weaving into two- and three-dimensional constructs, including tubular architectures that recover elastically under repeated compression. Short-term cytocompatibility is preserved despite the severe compaction: encapsulated fibroblasts retain over 90% viability, exhibit pronounced alignment within the yarns, and transduce externally applied strain. Twist densification thus provides a designable route to living, load-bearing protein textiles.
    Keywords:  Collagen hydrogels; Mechanical enhancement; Superhelical architecture; Textile tissue engineering; Twist-induced densification
    DOI:  https://doi.org/10.1016/j.bioactmat.2026.09.010
  14. ACS Appl Mater Interfaces. 2026 Sep 25.
      Biopolymer soft actuators capable of programmable, directional motion are essential for the advancement of adaptive soft robotics and intelligent responsive systems. However, existing soft actuators often suffer from weak directional control, poor spatial programmability, limited environmental adaptability, and an inability to operate under confined conditions. Here, we present a sustainable multi-stimuli-responsive soft actuator based on free-standing cassava starch films embedded with plasmonic gold (Au) and silver (Ag) nanoparticles that combines the intrinsic hygroscopicity of starch with plasmonic photothermal actuation. The hybrid films exhibit strong humidity-responsive deformation together with reproducible bending under green and blue laser irradiation. Notably, the nanoparticle-embedded films demonstrate excellent cyclic stability and reproducible light-responsive actuation over 1000 consecutive cycles. We show that laser-induced heating generates localized moisture gradients within the film that serve as the primary driving force for actuation. By engineering an asymmetric structural hierarchy with a polydimethylsiloxane (PDMS) layer, we achieve predictable bending pathways and spatially resolved shape transformations through multispot illumination. Notably, we demonstrate a trilayer Ag-PDMS-Au architecture that exhibits wavelength-selective bidirectional actuation: blue light induces bending toward the source, whereas green light drives bending away. We show that these actuators retain robust performance under confined environments and can be directly integrated into electrical circuits. This chromatically programmable mechanical response, combined with the ability to function in confined spaces, establishes plasmonic starch multilayers as a versatile and sustainable system for programmable soft actuation.
    Keywords:  plasmonic photothermal actuation; programmable soft actuation; starch biopolymer; vapor response; wavelength-selective actuation
    DOI:  https://doi.org/10.1021/acsami.6c09965
  15. Small. 2026 Sep 21. e75866
      We present the development of resins for two-photon polymerization (2PP) printing based on sidechain-functionalized poly(2-oxazoline) (POx) cross-linkers. These POx cross-linkers carry piperazine acrylamide end groups (B-Et-PipA) and amino side-chain-functionalized POx (B-Am-PipA). They were converted by 2PP into 3D hydrogel grids, designated as P(B-Et-PipA) and P(B-Am-PipA), respectively. The morphology of the obtained structures was analyzed using scanning electron microscopy (SEM), confocal laser-scanning microscopy (CLSM), and atomic force microscopy. P(B-Am-PipA) based hydrogel grids were covalently functionalized with the FITC-labeled GCWRGDSP (RGD) peptide containing the RGD unit, resulting in P(B-Am-PipA/FITC-RGD). To investigate the hydrogels' suitability to be applied as potential cell culture matrices, grids of the samples P(B-Et-PipA), P(B-Am-PipA), and P(B-Am-PipA/RGD) were prepared possessing different mesh sizes (10 and 25 µm). The initial cellular responses of L929 cells cultured on the different hydrogels were monitored using fluorescence microscopy and SEM. On P(B-Et-PipA) hydrogels, the cells exhibited no apparent interaction with the hydrogel scaffold. In contrast, P(B-Am-PipA) and P(B-Am-PipA/RGD) surfaces promoted cellular attachment and progressive adhesion, resulting in flattened cell morphologies. Among these, P(B-Am-PipA/RGD) grids with a mesh size of 25 µm demonstrated the most rapid and pronounced cell adhesion, indicating that RGD functionalization is particularly effective in enhancing initial cell adhesion.
    Keywords:  RGD; cell culture; hydrogel grids; poly(2‐oxazoline)s; two‐photon polymerization
    DOI:  https://doi.org/10.1002/smll.75866
  16. bioRxiv. 2026 Sep 18. pii: 2026.09.11.751043. [Epub ahead of print]
      Cells in vivo exist in a complex environment where they receive chemical and physical cues from neighboring cells and the extracellular matrix. Suspended, three dimensional (3D) cell culture enables the study of mechanical signals in a controlled in vitro setting where cells can exert forces on the extracellular matrix, and mechanical stimulation can be externally applied. In addition to mechanical cues, tissues in vivo also exhibit spatial heterogeneity and nonplanar topography. To facilitate the development of suspended 3D cell culture models with both spatial and geometric complexity, we previously introduced Suspended Tissue Engineering with Assemblable Microfluidics (STEAM). STEAM is an accessible, modular platform that utilizes fluidic patterning to create multiregional planar and nonplanar suspended cell-embedded 3D tissues. Herein, we further characterize the STEAM dome platform by developing a theoretical model that explains some experimental considerations necessary for successful two-region patterning in a nonplanar construct. We highlight a brief biological application of the planar and nonplanar STEAM platforms by creating simple but physiologically relevant model systems for the bladder, a sphere-like organ with concentric tissue layers and a central lumen that dynamically expands and contracts during filling and voiding. We demonstrate that the suspended configuration of the planar bladder smooth muscle tissue patch induces inherent tension, which can be increased by further straining the tissues; both result in muscle cell alignment along the axis of stretch as shown by a clear peak at 90 degrees in a radial sum analysis of the two dimensional Fast Fourier Transform of images with fluorescent signal from myosin heavy chain 11 immunostaining. Further, we utilize the nonplanar STEAM platform with a human urothelial cell line (HBLAK) and primary bladder smooth muscle cells (HBdSMC) to create a bladder wall model, resulting in a domed, bilayered tissue. STEAM integrates patterning precision, mechanical functionality, and customizability to actualize an accessible and low cost alternative to generate spatially and geometrically complex suspended tissues.
    DOI:  https://doi.org/10.64898/2026.09.11.751043
  17. Adv Healthc Mater. 2026 Sep 22. e03722
      Recent advances in three-dimensional bioprinting (3DBP) technology enable the production of customized bone substitutes. However, osteoconductive materials in their particulate phase may damage cells during extrusion resulting in poor cell viability after 3DBP. We developed a cell-friendly, osteopromotive, and antibacterial-based bioink. To achieve this, we combined gelatin methacryloyl (GelMA) with an Ag-doped bioactive glass-ceramic (Ag-BaG) on the molecular level with (3-Glycidoxypropyl) trimethoxysilane (GPTMS) to deliver a GelMA-AgBaG (GAB) hybrid material and compared its characteristics with GelMA and a GelMA-AgBaG blend nanocomposite. Elemental homogeneity was observed by scanning electron microscopy (SEM-EDS) in GAB. Rheological studies exhibited strong shear-thinning and high storage moduli. The swelling and degradation behavior up to 30 days demonstrated the materials' applicability for short-term applications. The cytocompatibility of GAB, along with its antibacterial properties, was observed, with only 2% of cell death compared to 5% for the pure GelMA, and about 35% for the blend (GelMA-Ag-BaGNPs), according to the post-extrusion cell viability. Extruded constructs and bioprinted scaffolds showed metabolic activity and cell viability over time, with the cell-laden GAB presenting improved cell viability when compared to GelMA and the nanocomposite blend. Thus, hybrid material GAB possesses advanced multifunctional characteristics suggesting GAB as attractive biomaterial for tissue regeneration.
    Keywords:  3D bioprinting (3DBP); bioactive glass; biomaterials; bone; cell viability; extrusion; hydrogel
    DOI:  https://doi.org/10.1002/adhm.202503722
  18. J Control Release. 2026 Sep 23. pii: S0168-3659(26)00798-4. [Epub ahead of print] 115394
      Tumor immunotherapy has transformed modern oncology, yet its clinical efficacy against solid tumors remains severely restricted by complex physiological and immunosuppressive barriers. Distinct from passive delivery systems, live bacteria can actively navigate into hypoxic tumor cores and intrinsically modulate local immune networks, making them promising intelligent therapeutic vehicles. In this review, we comprehensively trace their evolution from living vectors to engineered biofactories. We discuss how colonizing bacteria reprogram the tumor microenvironment (TME) via metabolic interventions-lactate depletion, hypoxia relief, arginine/tryptophan modulation, and adenosine degradation-to reverse immunosuppression. Furthermore, we highlight how bacteria enhance therapeutic efficacy by facilitating antigen presentation, sharing bacterial antigens, and sensitizing tumors to immune checkpoint blockade. Moving to programmable systems, engineered bacteria can act as biofactories that enable spatiotemporally controlled release of oncolytic toxins, cytokines, and checkpoint nanobodies via synthetic circuits and optogenetic modules. Additionally, we briefly introduce bacterial derivatives and highlight their unique advantages in expanding the immunotherapeutic landscape. Finally, key clinical translational bottlenecks for bacterial platforms are analyzed. Through continued interdisciplinary innovation, intelligent engineered bacteria with multifaceted sensing capabilities may ultimately lead to long-term patient remission.
    Keywords:  Bacterial derivatives; Engineered bacteria; Metabolic intervention; Metabolic–immune reprogramming; Tumor immunotherapy; Tumor microenvironment
    DOI:  https://doi.org/10.1016/j.jconrel.2026.115394
  19. Phys Rev E. 2026 Aug;114(2-1): 021001
      Biofilms are living materials composed of a cross-linked polymer matrix embedding active bacterial cells, whose mechanical behavior emerges from the collective organization of cells within the matrix. While significant progress has been made in characterizing their linear viscoelastic properties, this regime captures only a limited subset of their mechanical behavior, and the most relevant processes-adaptation and detachment-occur at large deformations. Experimental studies reveal a rich spectrum of nonlinear behaviors, yet a predictive description linking microscopic structure to macroscopic mechanical response remains lacking. This gap stems from the dynamic coupling between composition, structure, and biological regulation, and their temporal evolution. In this Perspective, we propose that reframing biofilms as living soft materials provides a framework for identifying the key physical variables required to mechanistically describe nonlinear mechanical behavior.
    DOI:  https://doi.org/10.1103/8wdc-fl92
  20. Nature. 2026 Sep;657(8133): 870-872
      
    Keywords:  Cancer; Cell biology; Molecular biology
    DOI:  https://doi.org/10.1038/d41586-026-02929-z
  21. Science. 2026 Sep 24. 393(6818): 1322-1328
      Networks of bioelectronic sensors and actuators enable closed-loop therapies that connect distant, related physiological dynamics. Currently, device interactions are limited by communication methods that inefficiently penetrate tissue and require bulky components. Inspired by the ionic signaling of the nervous system, we engineered a communication platform that uses tissue as a conductive medium to transmit signals among implants and wearables through epidermal, subcutaneous, intraperitoneal, and gastrointestinal spaces. Devices generate transient electric fields that selectively activate other devices when receiving pulses that switch on their specific transistor circuits. Implants are syringe-injectable, require negligible power consumption in listening states, and provide >10× greater tissue communication coverage than Bluetooth. In vivo in rats, we demonstrate coordinated, full-body networks of sensors and neural interfaces that enable wireless dual-limb motor control.
    DOI:  https://doi.org/10.1126/science.adz5300
  22. Small. 2026 Sep 26. e75880
      Bottom-up manufacturing of structural DNA nanotechnology requires a long single-stranded DNA (ssDNA) scaffold and hundreds of short (∼30 nt) ssDNA staples. However, large-scale production is limited by the high cost and environmental impact of solid-phase chemical staple synthesis. To address these challenges, we developed a phage-free, biological nanomanufacturing platform engineered in Escherichia coli. Two intracellular strategies for producing programmable ssDNA were evaluated: retron-based multicopy ssDNA (msDNA) synthesis via the Ec67 system and plasmid-encoded rolling circle replication (RCR). Although sequence-design flexibility is constrained by structural requirements within the retron (msd) cassette, the RCR-based system decouples ssDNA replication from sequence structure, enabling synthesis of arbitrary staples. This RCR platform generated long circular ssDNA (cssDNA) precursors of at least 1.8 kb with >99% sequence fidelity. Integrating programmable BseGI cleavage sites allowed targeted strand-selective enzymatic processing to release stoichiometric pools of 32-nt, origami-grade staple strands. Atomic force microscopy (AFM) confirmed that these biologically produced staples directed high-fidelity self-assembly of complex DNA tiles and hollow tubules. Notably, structural folding was demonstrated directly in crude cellular lysates. Together, these findings establish a phage-free framework for programmable in vivo ssDNA production and lay the foundation for future biological DNA nanomanufacturing workflows.
    Keywords:  DNA nanotechnology; DNA origami; DNA staple libraries; bio‐enabled nanofabrication; retron; rolling circle replication; single‐stranded DNA (ssDNA)
    DOI:  https://doi.org/10.1002/smll.75880
  23. Sci Adv. 2026 Sep 25. 12(39): eaeg1614
      Soft robots have shown promise across applications such as wearable assistance, gripping, manipulation, and locomotion, where adaptability, safety, and compliance are essential. These functions are largely enabled by a small set of fundamental actuation modes: contraction, bending, twisting, rotation, and stiffening; but existing soft actuators that realize these motions are constructed using distinct materials and fabrication methods. This lack of standardization fragments the design process, limits scalability, and restricts accessibility for nonspecialized users. To address these challenges, this paper introduces FaBrick, a modular actuated fabric material made through a scalable manufacturing process that uses heated, patterned rolling to produce it at arbitrary lengths. Through folding, cutting, sealing, and stapling, FaBrick material can be configured to replicate the contractile, twisting, rotational, and bending motions of other soft pneumatic actuators. Each actuator type is fabricated, modeled, and experimentally validated, and the actuators are integrated into (i) wearable robotic limbs, (ii) a one-piece adaptive gripper, (iii) an elephant trunk-inspired manipulator, and (iv) a quadruped-like locomotion robot. Together, these results establish FaBrick as a scalable, versatile, and user-friendly foundation for building integrated soft robotic systems from a single material platform.
    DOI:  https://doi.org/10.1126/sciadv.aeg1614